SimpCAD XSimpCAD X BETA

Every tool

The same list as the program's Learn panel (95 tools). BETA marks tools still being finished: they work, with limits said on their panel.

Create

Business card maker
A printable business card with your name, job, phone, email and a QR code. Raised, flush or engraved, in up to three colours.
Gridfinity bins & baseplates
Storage bins and baseplates on the standard 42 mm grid, so bins click into the plate and stack on each other.
Sketch K
A 2D drawing board. Draw with shapes, pen, splines, text and constrained lines, then extrude it up or revolve it into a round part. Draw on the ground, the front, the side, or on any face (move the workplane there first with W).
Sketch from a part
Click a flat face of a part: the sketcher opens on that face with the face’s outline already drawn as lines (and holes) you can change. Press Done and the new part stands on that face. Handy to copy a shape, or to start a feature on a face.
Text
3D text in any font on your computer, or any font file you add (TTF, OTF, WOFF, WOFF2). Text can follow a curve.
Connect points
Click points anywhere on your model — they snap to corners, edge middles and points you already placed — then build a part that joins them: a flat plate filling the outline (great for gussets and braces between walls), an upright wall of a set height and thickness that follows the points, a round rod along them, or a solid that wraps them all. Segment lengths and the total path show as you go.
AI designer BETA
Turn it on in Settings → Beta tools. Experimental and not great yet. The AI is Ollama, a separate free program: SimpCAD X only passes your request to it, so how good the results are depends on Ollama and its model. Describe a part in words and a free AI running on your own computer (Ollama, using your NVIDIA RTX card) builds it from normal shapes you can still edit. Nothing leaves your PC.
Loft
Blends smoothly between two or more sketches stacked at different heights, like a vase going from square to round.
Sweep
Moves a shape along a path to make a solid: a circle along a curve makes a pipe, a square along a zig-zag makes a bar with neat corners.
Word fill
Packs your words into a heart, a cross, a circle or rows inside a frame, each row stretched to fill the shape, the letters and rows overlapping so it is all one piece. Checks for loose bits and thin joins. For a 3D printer (with raised letters) or a laser cutter.
Box maker
Makes a box of flat panels that slot together with tabs, no glue: 3 to 12 sides or a rectangle (with dividers), lid or open top, for a 3D printer or a laser cutter.
Image canvas
Pin a photo or drawing to the top, front or side plane and trace over it.
Pipe maker
Draw a pipe network from above — bends, junctions and fittings — and get one printable, watertight part. Round, square or hexagon, solid rods or hollow pipes.
SVG & Text
Turn text or an SVG drawing into real 3D geometry: a solid on its own, raised on a face, engraved into it, cut right through it, or wrapped round a cylinder or any part. A live preview shows the result before you apply it.
Laser Studio
A studio of its own for laser engraving and cutting: a flat work area sized to your machine, shapes, text and SVG drawings, exact Union / Subtract / Offset, layers that say how each part burns, a job preview in the order the laser runs it with a time estimate, and files for Bambu Suite, xTool Studio, Luban or G-code.
Bearing maker
A working bearing that prints in one go, already assembled: inner ring, outer ring and rollers, sized for your printer.
Hardware library
Real-size screws, nuts (incl. nyloc), washers, heat-set inserts, magnets, bearings, bushings, dowels, shafts, O-rings, PTFE tube and electronics. Every item can be made as the recommended printed hole for it.
Infill patterns in Sketch
In a sketch, select a shape and fill it with a pattern of holes: honeycomb, triangles, grid, diamond, circles, stars, slots, waves, organic, 3D cubes, octagons, crosses, hearts, chevrons, bricks or your own text. A live preview shows on the shape while you change it.
Freeform surface
A smooth curved surface shaped by a grid of heights (dome, saddle, wave…), made printable as a panel or a solid with a flat base.
Generators
Ready-made parts with their own live panel: a Keychain (name, shape, ring), a QR code (link, Wi-Fi or text), a Griptok phone-grip top in colour and Flexi critters that print in place. Also in the shape library under Generators.
Keychain generator
Type a name and get a print-ready keychain: pick an outline (follows the letters), rounded, pill, circle, tag, heart, shield, bone or star, add an icon, raised or engraved letters, a raised border, and a key ring outside, inside, on top or in a corner. Everything updates live. One click splits it into two colours, and it can hold a hidden NFC tag.
Your own Flexi
Turn any shape into a Flexi: a solid part, a sketch, an imported SVG logo, a photo-to-part outline or text. Make bendable opens on it with pin joints that swing side to side already placed: move or add joints, pick another hinge, and it prints in place, already moving.
QR code generator
Turn a link, a Wi-Fi login or any text into a QR code you can print: a plaque, a sign or a keychain. It shows how big each square is so you know it will print and scan, and can add a label underneath, a key ring and an NFC tag pocket.
Griptok maker
The round top for a phone grip, in colour: type a word or two and the letters bulge to fill the whole circle, or load a logo or drawing and it is split into a few colours. Every colour is its own part, so a multi-colour printer prints it in one go.
Flexi critter
Wiggly print-in-place critters: a fish, snake, caterpillar, lizard or your name. The body appears and Make bendable opens with the joints placed between the fins and legs: pins that swing side to side through V-shaped gaps. Change the critter, its size or the number of pieces in its panel; move joints or pick another hinge in Make bendable.
Photo to part
Photograph a part next to any bank, ID or loyalty card and SimpCAD X traces its outline (and its holes) at its exact real size: the card is always 85.6 × 53.98 mm, so it gives the scale and corrects a tilted camera. Then it opens in the sketch editor, ready to extrude into a replacement.

Arrange

Reference points
Points you put on a part (a corner, an edge middle, a face middle or the centre) that other parts snap to. They move with the part and never print.
Cruise (hold C) hold C
Slide a part over the surfaces of other parts: onto tops, sides and slopes, turning to sit flat on each face.
Snap grid & workplane
The grid menu at the bottom sets how far parts jump when you move them.
Align L
Shows black dots around the selection. Hover a dot to preview, click to line everything up on that side or centre.
Mirror M
Shows a pair of arrows on each side of the selection. Click an arrow to flip it that way.
Workplane W
Click any face to move the workplane onto it. New shapes land on it, parts slide across it and D drops onto it.
Note N
Pin a note to a part or a spot on the workplane.
Pattern
Makes linear, grid, circular, spiral or along-a-path copies. The pattern stays editable: change the count or spacing any time in the properties panel.

Modify

Lasso cut
Draw round any bit of a part to cut it off as its own part, straight through as you see it.
Taper, twist, lean & bend
Every part's panel (shapes, text, imported models and groups) can taper the top, twist, lean or bend it by its height.
Outline
The shape of any part seen from above, as a new part: a raised rim around it (a cookie cutter or a tray edge), a plate under it, or an outline line. Works on imported STL and 3MF files too.
Twist & bend
Twists, bends, tapers or leans any part: up its height, or along its length or width (a strip or a ladder rail lying flat).
Mold maker
Makes the two halves of a mold round a part (yours or an imported STL, OBJ or 3MF), to cast copies in silicone, resin or plaster: a block round it split at the widest point, locating keys, a pour hole and an air vent.
Hollow
Empties a solid inside, keeping an even wall. Choose how it opens: Sealed, Screw cap (a threaded opening and a cap, for urns and keepsakes), Push-in plug, Cut open flat, or Open faces you pick.
Fillet & chamfer
Rounds or bevels edges. Click single edges, or click a flat face to do every edge around it at once, curved edges and holes included. Drag the size and watch it change live.
Push / pull
Click a flat face of any part and drag it out to add material, or in to cut into the part (or type the distance). It is a step you can change later: select it and change Distance, or turn it off in the design tree.
Ribs & bosses
Adds a boss (a round post with a screw hole), a rib (a thin stiffening wall) or a corner gusset (a triangle brace) on a flat face. Each one is joined to the part as its own part inside a group, so you can resize it or turn it off later.
Design variants
Keep several versions of one design in the same project: each variant remembers your Parameters and which parts and steps are turned off (Small and Large, with and without a lid…). Switching is one step in History.
Parameters
Name a size once (width = 60, wall = 2) and use it anywhere. Double-click any size, position or setting box and type a name or a formula such as width - 2*wall. Change the parameter and every part that uses it follows, even inside groups (they rebuild). A box that follows a formula shows fx.
Split
Cuts a part into two printable pieces along a plane you can slide and tilt, with optional pins, plugs, dowels, dovetails, magnet pockets or real threads so the pieces fit back together.
Threads
Adds real, printable 60° threads — bolts, threaded holes and jar lids — with presets like M5 × 0.8 or 10 × 2, custom pitch, depth and clearance, and a will-it-print check for your nozzle and layer height.
Surface texture
Turns a plain surface into real printable texture: knurling, wood, brick, stone, concrete, fabric, leather, fuzzy skin, rough, diamond plate, carbon fibre, hexagons, ribs and dots.
Cut to fit
Cuts a model that is too big for your printer into pieces that fit the bed, with dowels, pegs, magnets or threads on every cut so they line up again.
Logo / watermark
Upload a logo once (PNG, JPG or SVG), see it live under the mouse, and click a face to place it — raised or engraved. On a round side (a cylinder, a mug) it truly wraps round the surface.
Make bendable
Any part — an imported STL too — is cut into slices along lines you place on it, and hinges hold the slices together. It prints in one go, already assembled, and bends.
Scan Studio
A studio of its own for 3D scans: choose your scanner, import meshes and point clouds, check every hole and loose bit, clean, fill holes, reduce, align, line up and fuse scans, fit shapes, compare with the original and export.
Flatten
Planes a face perfectly flat, just deep enough that the whole face is flush, and can lay it on the bed. Great for warped scans and rounded bottoms.
Sculpt 1–9 brushes · [ ] size
Shape a part by hand with 12 brushes, like modelling clay: Draw, Clay, Inflate, Layer, Crease, Pinch, Smooth, Flatten, Scrape, Fill, Nudge and Grab. The part stays a closed, printable solid.

Basics

Move, size & lift drag
Drag an object to move it. White squares change its size, the black cone lifts it up or down, and the curved arrows rotate it.
Rotate drag the curved arrows
Drag one of the curved arrows. The arrows always sit at the part's current top, even after you flip it. Inner ring (SNAP): turns in firm steps set by "Rotate" at the bottom. Outer ring (SMOOTH): turns smoothly but sticks at key angles like 15°, 22.5°, 45° and 90°, and turns green with LOCKED.
Solid & Hole H / S
Any shape can be a hole. Holes cut away from solids when you group them together.
Adding shapes drag from the panel
Drag a shape from the right-hand panel onto the workplane, or onto any face of another shape: it stands on that face, tilted to match.
Duplicate & repeat Ctrl+D
Makes a copy in place. Move or rotate the copy, then press Ctrl+D again: each new copy repeats the same step.
Camera F · Home
Right-drag to orbit, middle-drag to pan (the point under the mouse stays put), wheel to zoom toward the cursor — right down to 0.02 mm.
Smart snapping Ctrl = free
While you drag, parts line up with other parts: faces push flush, edges and centres line up, corners meet and round parts drop onto hole centres. A pink guide shows what it snapped to.
Print (open in slicer)
The green Print button sends your design straight to your slicer as a 3MF with colours. No saving and finding files.
Printer picker
Choose your printer in the bar at the bottom and the workplane becomes its print bed, so you can see straight away if a design fits.
Lay flat & arrange
Turns every part (or just the selected ones) onto its best flat face and spaces them out neatly on your print bed. Ready to print in one click, and one undo step.
Move arrows A
Red, green and blue arrows on the selected part that move it along one direction only. The centre dot slides it flat.
Performance mode & beta tools BETA
Performance mode (top bar) keeps big projects smooth on slower computers by drawing lighter copies of busy parts. The bar shows live CPU, graphics and memory use. Far-away and small parts are drawn lighter automatically, like distant scenery in games.
Perfect Fit
Printers squash plastic outwards, so holes print small and outsides print big. Print one small test card, tell SimpCAD X which hole the test peg fits (or type caliper readings), and every export and Print is corrected for that printer: holes and pegs fit first time.
Export for printing
Export STL, 3MF, OBJ or STEP. Every export is checked and repaired so slicers get a clean, closed, watertight solid; 3MF keeps colours and part names, STEP opens in other CAD programs.

Combine

Group Ctrl+G
Merges the selected solids into one and cuts out any holes. The parts are remembered in the Design tree, so you can still change them later.
Bundle Ctrl+B
Holds the selected parts together so they move, turn and size as one, while each keeps its own colour and shape: nothing is joined and holes cut nothing. Like Bundle in Tinkercad. Ungroup takes them apart again.
Ungroup Ctrl+Shift+G
Splits a group back into the parts it was made from. On a part made of loose pieces (a brick wall, letters, an STL with many bodies) it separates them: one part per piece.
Intersect
Keeps only the space where the selected solids overlap.
Separate into pieces right-click
A part made of loose pieces (a brick wall, letters, an STL with many bodies) becomes one part per piece, so you can move, colour or delete each one.

Inspect

Overhang map
A switch: while it is on, faces that lean out too far to print without support turn orange (close to the limit) and red (needs support), live as you design. Faces sitting on the bed never count. The card shows how much area needs support and can turn the selected part to its best way up.
Dimension lock
Keeps one part a set distance from another along X, Y or Z: edge to edge or centre to centre. Move or resize the other part and the locked one follows. The distance can be a formula using Parameters.
Ruler R
Put the ruler down on the workplane. Every part you select then shows its distance from the ruler and its size, and you can type new values.
Measure Shift+R
Click a face, a hole or a point and read its size: a hole or a peg gives its diameter, two flat faces the distance or the angle between them, a hole and a peg centre to centre and edge to edge. Points snap to corners (they turn green). Copy any value with one click.
Section view
Cuts the view in half so you can see inside, with hatched cut faces. Nothing is changed in your model.
Physics
Shows how much each part weighs in your material and infill, marks the centre of gravity, tells you if it will stand up or tip over, and can drop or tilt it under gravity.
Cost
A quick guess at what a print will cost: weight, metres of filament, rough print time and electricity, using your own price per kilogram in £, $ or €.
Precise placement
Type exact positions, nudge by a step, rotate by exact angles and scale by a percentage. Shows the cursor's exact coordinates.
Pivot point
A pink marker that rotating, mirroring, scaling and new hinges turn around.
X-ray X
Makes every part you haven't selected see-through, so you can check cavities, holes and parts hidden inside others.
Model repair
Checks a part for gaps, doubled edges, tiny loose bits and inside-out surfaces, and fixes them in one go, or rebuilds it as one solid. Great for downloaded STLs.
Strength x-ray BETA
Shows where a part would snap and roughly what force breaks it, knowing that 3D prints are weakest between layers. Click where it is held, click where it is pushed, set the force: the part turns from blue (fine) to red (where it gives way).

Assemble

Motion & joints Space = play
Connect parts with a hinge or slider, set each one's start, end, speed and mode (or make it follow another joint, like gears), then play everything on the timeline with live collision highlighting.
Mate parts
Puts one part against another by their faces, and keeps it there: Facing (faces together, like a lid on a box) or Same way (lined up side by side), with a gap and centred if you like. Move the base and the mated part comes along; move the mated part and it slides along the face.
Parts list
A list of every part in the design: identical parts counted together, with size, material, filament weight and cost (your prices from Cost), and the screws, nuts and bearings to buy. Save it as a spreadsheet (CSV) or copy it.
Threaded connector
Joins two touching halves with a matching male thread and female threaded hole (defaults: 10 mm, 2 mm pitch, 0.15 mm slop, hole 2 mm deeper, bevelled ends).
Print in place
Checks every pair of moving parts for the small air gap they need to print as separate pieces, shows fused spots in red and tight spots in orange, and can cut the gap for you.

Pro CAD

Pro mode top bar: Pro
Simple / Advanced / Pro at the top. Pro shows every tool plus the Pro CAD tab: Edit mesh, Loop cut, Knife and Sub-D, for detailed mesh modelling. Kids and beginners can stay in Simple or Advanced and never see it.
Edit mesh Tab
Edit the points and faces of any part directly, and it stays a closed, printable solid after every step. Select an area, make it a perfect circle, extrude it into a tube, inset, bevel, loop cut, knife, smooth.
Loop cut Ctrl+R
Adds a ring of edges round the part. Move over the part to see the yellow ring, click to cut. Then select the ring and move or scale it to shape the part.
Knife K
Drag a line across the part to cut new edges into the surface you can see, exactly along the line.
Smooth subdivision (Sub-D)
Every triangle becomes four and the whole part rounds off. Keep sharp edges on to keep corners crisp; off for soft organic shapes.

All chapters · Tutorials · Tool reference · Open SimpCAD X