SimpCAD XSimpCAD X BETA

Getting it ready to print

A closed solid

Slicers need a closed surface. Imported meshes with gaps are noticed when they come in; Repair (Modify) lists the problems, shows each one and fixes them: Quick, Smart (holes patched along the surface) or Advanced (rebuilt as one solid). The preview says how much changed before anything does.

Lay flat and overhangs

Lay flat puts the best face on the bed; the overhang map stripes what needs support while you design.

Fits and clearances

Your printer and material (Settings) set the clearances that threads, hinges, lids and connectors use. Perfect Fit (the Fit button): print one small test card, and every export then corrects hole and peg sizes for your printer.

Too big for the bed

Cut to fit and Split cut a part into pieces that fit, with connectors to join them again.

To the slicer

Export → STL or 3MF, or Print to open it in your slicer (Windows program). Get a design ready to print.

All chapters · Tutorials · Tool reference · Open SimpCAD X