Open, check and change STEP files
STEP is how CAD programs swap exact solids. SimpCAD X opens STEP files with their parts, folders, names and colours. You can measure them, change them, and save them as STEP again or as STL and 3MF for printing.
Open a STEP file
Drag a .step or .stp file into the window, or use Import. The Exact engine reads it as true solids, and it's on by default in the Windows app and on the web. Each body becomes a part, keeping the file's folders, names and colours.
Check it
- Measure: click inside a hole for its diameter, or two faces for the distance or angle between them.
- Section view: cut the view open to see inside.
- Overhang map: see which faces will need support before you slice.
Change it
Add shapes, cut holes and slots, round or chamfer edges, or split a part to fit your printer's bed. With the Exact engine, roundings and chamfers are true curves.
Save it
Export STEP with true curves to take it back into another CAD program. You can also export STL or 3MF (with colours) for your slicer.
Good to know
A STEP file carries the finished solid, not the steps another program used to make it, so a part comes in as a solid you change directly. SimpCAD X is made for 3D printing. It isn't a replacement for engineering drawing or simulation software.
More: CAD for 3D printing · Online STL editor · Free CAD software · Repair STL files · 3D modelling for beginners · Tinkercad alternative · Online CAD · What's new