SimpCAD XSimpCAD X BETA

What's new

Every build of SimpCAD X lists its changes here and inside the program (Settings → What's new).

4.9.90

build 2026.11.19a · 19 Nov 2026Latest

Image tools, finger joints, decals on curves and a steadier program for big designs

New

  • Image tools: Trace image makes smooth curves you can edit (presets for logos, curves, sharp corners, fine detail and multicolour), Save SVG / DXF, and Convert pictures (PNG, JPEG, WebP, GIF, BMP, AVIF, SVG, DXF), several at once into a ZIP. All on this computer.
  • Finger joints in Split, Connector and Cut to fit.
  • Logos and decals follow curved surfaces, raised or engraved.
  • Bundle on the toolbar (parts move together and keep their colours); the shortcut list is found by search (Ctrl+K).
  • Present › Explode: separate strengths for X, Y and Z.
  • A part inside a group has its own right-click menu, with Copy it out of the group.
  • Academy lesson: revolve a sketch into a drawer knob.

Better

  • Very big designs are kept in Projects automatically, as one big project file.
  • Auto-save writes designs piece by piece: far less memory on big designs.
  • With your own workplane, Position X / Y / Z count from it.
  • Pop-up messages can stay longer (Console); spelling check language in the feedback and chat boxes.
  • Projects offers to carry on with last time's design at start-up.
  • Long Russian labels fit their buttons.

Fixed

  • Moving a very big part no longer freezes the window; Ungroup / Separate of a huge part works in the background.
  • A hole's outline no longer shows through a solid that is merely in front of it.
  • A new shape is never given an impossible position; the rotate disc never outgrows the view.
  • Designs saved by 4.9.86 or older with groups inside groups are checked again on opening (wheel rims no longer hidden).

4.9.89

build 2026.11.16b · 16 Nov 2026

A new sketcher, storage box walls you can shape, and many of your requests

New

  • Sketcher: every tool on every drawing (round corners, offset, trim and mirror on shapes, text and SVG logos); live sizes while drawing; type a size after placing a shape; lines snap into shape as you draw; Pick areas; Pattern (a row or round a centre); a live 3D preview.
  • Storage box: each divider can be moved, shortened or lengthened by its ends, typed in, added inside one compartment, or taken away.
  • Loft: a rounded end (dome or paraboloid) on the first and / or last section.
  • Screws: a choice of drive: hex key, cross (Phillips), slotted, star (Torx-like) or none.
  • Settings → Save folder: an optional second folder for exports (STL, STEP, 3MF…); projects stay in the save folder.
  • Fill hollow (right-click): makes a hollowed model solid inside again.
  • Sliding lids: a grip on top (or a finger hole, or nothing).
  • The height above the workplane is shown next to the sizes, and can be typed.
  • Turning steps of 0.1° and 0.5°.
  • Arrow keys move across the bed in every view; Ctrl + Up / Down lifts; Alt moves a fifth of the step; comma and full stop change the grid step. With the grid off, a step is 0.01 mm.

Changed

  • The clothing pen holder generator has been taken out; its garments are in Community Shapes. Designs that already have one still open.
  • Shift + drag on a corner follows the mouse along its diagonal, snapping only the longer side.

Fixed

  • Very big Tinkercad designs could stop at "Joining the groups": a part with surfaces lying on each other sent the join into a loop until the browser ran out of memory.
  • Projects could not be deleted after choosing a save folder.
  • With "Sizes always shown", the sizes disappeared while moving the mouse to type in them.
  • Sketch from part left the workplane on the face after Done, so the part looked sunk under it.
  • The Cutter froze for many seconds on detailed parts (now 10 to 20 times faster).
  • Resizing a very big text by its handles stalled on slower computers.
  • Dark mode: the mirror arrows and the ruler were hard to see.
  • Website: a tab left open while the site was updated now asks you to reload, instead of its geometry engine failing.

4.9.88

build 2026.11.16a · 16 Nov 2026

Fixes for 4.9.87

Fixed

  • Clothing holders made a plain box in 4.9.87: the garment shapes were missing. They are now downloaded once, the first time you make one.
  • Bringing over a very big Tinkercad design could run the browser out of memory (4.9.87 used about 1.8 GB more): inner groups are worked out one at a time again while it opens.

4.9.87

build 2026.11.15a · 15 Nov 2026

Clothing holders, a lithophane bauble, and a smoother iPad

New

  • Clothing pen & can holders: puffer jacket, puffer jacket with a high collar, hoodie and knitted hoodie; can holder mode for standard, slim and tall cans; a divider insert; body length and sleeve width.
  • Lithophane bauble: a hollow ball with your picture round the front, a light hole and a hanging loop.
  • Wavy ribs texture.
  • Anycubic Kobra S1 Max in the printer list.
  • When the Tinkercad bookmark is updated, you are told once, with a button to get the new one.

Touch screens and iPad

  • Moving a small part with a finger moves it (it no longer catches a handle and resizes it).
  • Buttons are big enough for a finger; number boxes open the number pad.
  • Scrolling a panel no longer changes sliders.

Fixed

  • The size box beside a handle stays while you type in it.
  • Closing the window asks first when there are changes that are not saved yet.
  • The Ruler can be removed with its × or Esc.
  • The outer rotate ring turns in whole degrees; the starting position is a faint outline.
  • Holes no longer show red across the part after turning the view.
  • Tinkercad tyres that hid their rims come over hollow, so the rims show.
  • Opening a very big design no longer freezes while its saved shapes are checked.
  • Autosave of a design with a very long undo history saves the design without the history instead of nothing.
  • Laser Studio opened before the geometry engine had loaded no longer shows an error.
  • The parts list of a design with tens of thousands of parts no longer freezes: the newest 2,000 are listed, search finds the rest.
  • A full disk is recognised on Windows in any language.
  • The tool bar stays at its start when you drag its handle to show more tools.

4.9.86

build 2026.11.13a · 13 Nov 2026

A new look, huge Tinkercad designs, and smoother big designs

New

  • New branding: the X mark and SimpCADX name in the top bar (white and blue in dark mode), the start-up screen and the program icon.
  • A small light / dark switch in the top bar.
  • Storage box: the sliding lid's finger notch can be switched off.
  • Support window: Ko-fi and PayPal as big buttons.

Faster

  • Saving a big design: 10.7 s to 0.9 s per save copy, memory 2.4 GB to 0.8 GB.
  • Fins on big parts: 40 s to 3 s, and it works in the background.
  • Mesh doctor on a million triangles: a 2.3 s freeze to 0.14 s.
  • Library pictures are made in advance: no more long freezes at start-up.
  • Slow shapes (such as the neon sign) are made once per change, when a dragged setting rests.
  • Bringing over a huge Tinkercad design holds its file once, not twice.

Fixed

  • Bringing over a huge Tinkercad design (thousands of parts) no longer runs the window out of memory or hangs at “Joining the groups”.
  • Groups whose holes cut away everything are empty, as in Tinkercad, instead of being marked as errors; so are Tinkercad groups of holes alone.
  • Parts with hairline cracks (corners a few thousandths of a millimetre apart) are joined exactly instead of being shown side by side with an error.
  • Flat parts touching exactly (Tinkercad-style signs) are joined on their outlines: exact and quick.
  • Sketch: Offset no longer stops with an error if its lines were undone while it waited.
  • Undo while Split, Cut through, Repair, Simplify or Thicken is working no longer mixes up parts.
  • Joints: the Test animation stops when its joint is removed or undone.
  • Handles of a turned part follow it: the side pointing up is its height, as in Tinkercad.
  • Size labels stay while the mouse is near them, so a value can be typed.
  • Sketch: every part's outline is exact and sharp at any zoom.
  • Auto-save on a full Windows disk says “the disk is full” plainly.

4.9.85

build 2026.11.12a · 12 Nov 2026

Fast, reliable, powerful: big designs, a safer Repair, keycap clickers

New

  • Keycap & fidget clicker generator (phase 1): MX housing, keycap profiles, fit presets, calibration pieces, section and exploded views.
  • Sizes can be typed as a percent: 150% in a size box makes that side one and a half times as long.
  • After a proportional resize (Shift), typing one length scales the whole part, as in Tinkercad. “Keep proportions” shows it.
  • Sketch › Revolve: “Revolve sides” from 3 (a triangle) to 256, with a Sides box beside the angle in the sketch editor. The part keeps its size when you change it.
  • Colour picker: an eyedropper. Click a part to take its exact colour (or what you see, for pictures and multi-colour parts).
  • Library nuts (hex, nyloc, square, wing, acorn, flange): “Real threads” cuts a real thread a printed bolt of the same size screws into.
  • Pattern Studio: “Colour in from the sides” (mm), written into the 3MF for each part.
  • Basic Shapes › Essentials: a Text tile.

Faster

  • Undo / Redo in big designs keep the parts that did not change: 12 steps at 1,000 parts took 678 ms, now 52 ms.
  • History steps share unchanged parts: 676 KB a step at 3,000 parts, now 12 KB.
  • The Design tree redraws only the rows that changed; part outlines are worked out once while a part is unchanged.
  • A project's picture is made after the save, one view at a time, so saving a new big design no longer stalls.
  • Select all in a design of 5,000 parts: the program's own share is a third shorter.
  • The AI connector's shape list no longer builds every real-size shape (3.6 s, now instant).

Fixed

  • Model Repair could use several GB of memory and crash on a part with knots of tiny faces; it now finishes in seconds and never leaves more broken edges than it found.
  • Export's “checking & repairing” step on such a part no longer hangs.
  • A design too big to save automatically now says so plainly, with a Save button, instead of a storage error.
  • Web version: a save the browser stopped for no reason is tried again, and “storage full” is said only when it is true.
  • Settings were lost when the browser's small storage filled with shape pictures; pictures now have their own share.
  • A slow start no longer saved the restored design as a duplicate project.
  • A part whose numbers went bad (not a number) is put back from the last good step, and the command is reported to us.
  • A shape whose picture takes too long to draw no longer freezes the Shapes panel every time it opens.
  • Keycap clicker: the stem wall is no longer thinned by the socket lead-in.

4.9.84

build 2026.11.11a · 11 Nov 2026

Thirty new tools: assemblies, instructions, lattices, exact faces and more

New

  • Texture to colour: a surface texture becomes a second colour, as the raised pattern or an inlay filling the recesses. The two bodies meet exactly; export 3MF for a two-colour print.
  • Group: parts of different colours now become one colour, as in Tinkercad. To keep each part's colour (multi-colour printing), switch on Settings › Groups keep each part's colour; a choice you already made is kept.
  • Group: holes that cut away everything now leave an empty group, as in Tinkercad (Ungroup gives the parts back), instead of Group being refused.
  • Align › By points: put one part on another by 1, 2 or 3 points (corners, edge middles, hole centres, reference points); the 3-point fit never mirrors.
  • Align › Even gaps (X, Y or Z, by the room parts really take) and Match size (width, depth, height, or all in proportion).
  • Your own keyboard shortcuts for any tool, command or shape (F1 › Change shortcuts…); saved toolbar layouts by name.
  • Round / Chamfer: when some edges can't take the size, "Leave out the red edges" rounds the rest.
  • Hole pattern: angled holes, holes turned one by one, slotted counterbores and countersinks, and rows of holes round a curved wall.
  • Heat-set inserts on a face: M2 to M8 with suggested holes, lead-in and optional bosses.
  • Box with sliding lid: dovetail track and a snap catch. New: Jar with twist-lock lid, the fit checked.
  • Mounting bracket (flat, L, U, Z, standoffs, adapter), and Bracket on holes: click the holes, the bracket is made on them.
  • New tool, Support fins: thin walls under a part's overhangs that hold it while it prints and snap off cleanly, instead of the slicer's supports. Shown live, with spacing, gap and tines to set.
  • Storage box: new shapes. Oval (or round), rounded ends, hexagon and octagon, with the lid, hinges, catch and compartments all following the curve.
  • Storage box: a new Print in place hinge. The box and lid print as one part with the hinge already together, the lid laid open behind the box, no supports.
  • Storage box: set out the compartments on the box itself. In the Compartments view, + adds a divider in one compartment, drag a divider to move it (its sizes shown as you go), × takes it away. And Dividers in the lid too, so things stay put with the lid shut.
  • New generator, Socket organiser: a peg for each socket on the 1/4", 3/8" or 1/2" drive square, each size labelled, metric and / or US (inch) sizes, your own size lists, impact sockets.
  • A shape dropped on a sloping face (or the workplane put on one) now lines up square to the face's edges, so the arrow keys move it along them.
  • New library group, FPV Drone Parts: a quad frame (X or stretch X) for the usual stacks and motor patterns with a propeller check, FPV and action camera mounts, an antenna mount (SMA and receiver tubes), a prop guard and a battery pad.
  • Sketch: formulas from Parameters in sketch sizes; project edges and outlines of parts into a sketch; a clear message when a rule repeats another.
  • Configurations: duplicate one, and export every configuration at once.
  • Snap-fit joint and detent (click) wheel, with the strain worked out for your material.
  • Connector cutouts on a wall: USB, HDMI, Ethernet, DC jack, audio, XT60, D-sub, cable glands, with clearance.
  • Board templates: Raspberry Pi 4 and 5 with their port openings, relay, motor and stepper driver boards.
  • Mouse ears: breakaway pads under sharp corners to stop them lifting.
  • Ribs & bosses: a rib in an inside corner between two faces.
  • Lay flat & arrange: parts that don't fit on one bed can be spread onto more workspaces.
  • Batch processor (Export): repair, lay flat, scale and convert many STL, OBJ and 3MF files at once into one zip.
  • Text stencil: bridges hold the middles of letters like A, O and R.
  • Mold: a check that shows undercuts and spots where air would be trapped.

Fixed

  • Exporting a design with a texture kept on one picked face failed with an error ("key is not defined").
  • Grouping big designs made from many cuts could run out of memory and crash ("Out of Memory"), or say a part had gaps. Found with a user's design: a hole a few billionths of a millimetre short of level left a skin with no thickness. Such holes now cut right through.
  • Auto-save could fail with "cannot find the path" when Documents had moved (OneDrive).
  • Web version: projects and recovery copies over about 130 MB were not kept; very big designs could fail to auto-save.
  • Web version: a big export made its file but the Save window never opened and it went to Downloads. Now "Your file is ready" asks, and Save… opens the Save window.
  • Editing a sketch inside a hollowed part from the Design tree lost the changes on Done.
  • Holding an arrow key made one Undo step for every repeat; now one step.
  • Opening some 3MF files could hang; exporting a big textured part as OBJ, or an export waiting for your answer, could be reported as stuck.
  • Shape pictures were black in light mode.
  • Pattern: with "Group the result" unchecked the copies were grouped anyway.
  • Jar and screw lid: changing the height changed the thread pitch.
  • Quick switches: on a short screen the bottom of the list (Language, All settings…) could not be reached; it scrolls now.
  • Align: the exact Align rows were not translated.

4.9.83

build 2026.11.09a · 9 Nov 2026

A new Projects screen, a knurled nut, clearer mirror arrows

New

  • The program opens at the Projects screen, rebuilt like the Academy: your projects, New design, the Academy and What's new. Quick settings › "Start at Projects" off opens straight into your last design.
  • Hardware › Knurled nut: sizes M2 to M20, a real thread or a pocket for a nut or bolt head, closed top, straight or diamond knurl.
  • Quick settings › "Ctrl+D repeats my last move": off, Ctrl+D always makes a plain copy in the same place.
  • Bring designs over: a part that can't be read no longer stops the whole design; the rest comes over and the parts left out are named.

Fixed

  • Mirror: an arrow seen end on was drawn at a chance angle on top of the part; the arrow under the mouse now turns blue and says what it flips.
  • Paste: zoomed in on small parts, the copy landed off screen. It now lands a short step away, on screen.
  • Ctrl+D after resizing a copy made each copy smaller or bigger again, without saying so. It now says so, with a way to make plain copies.
  • The shape category list couldn't be scrolled on a short window.
  • Sketch: pressing Undo while dragging a point could stop the program.
  • A window left minimised for a while could lose its connection to SimpCAD X, and then nothing could be saved. It now stays connected; if the connection is ever lost, it says so and offers a copy of your design to download.

4.9.82

build 2026.11.08c · 8 Nov 2026

Holes cut cleanly, shape pictures, copies over a length

New

  • Pattern › Linear: space the copies by the step between them, or spread them over a total length.

Fixed

  • Group: a hole and a part both shown at 0 mm could leave a thin skin under the hole. Fixed for the exact engine too.
  • Torus knot: the tube now has 48 sides instead of 20, so it is smooth in a slicer and in STEP files, not only in the program.
  • The shape panel showed most shapes as plain coloured squares after one picture was slow to draw at start-up. Pictures are now drawn properly, later if needed.

4.9.81

build 2026.11.08b · 8 Nov 2026

Fixes for groups, AI exports and the workplane

New

  • A moved workplane says how high it is on the bed ("Workplane 1.8 mm up"), or that it is on a face.
  • Remove chamfer / Remove rounding in its panel; Loft offers "Remove and loft" for a sketch with a chamfer.

Fixed

  • Groups: "Rebuild loop: a group kept changing", and a part keeping an old shape after quick changes.
  • Generators (business card, keychain and the rest) were made at 0 mm while the workplane was up on a face, so they sat under the grid. They now put the workplane back on the ground first and say so.
  • Connect to AI: a STEP export with a part that cannot keep true curves (a gear) waited for a click nobody could make; it now goes ahead and tells the AI.
  • Pattern Studio: Clean edges could make millions of triangles and freeze; it now stops at a million and says so.
  • Resizing the window with a toolbar's "more" list open could show an error.
  • Ungroup (split into pieces) of a very big STL is about 3 times faster, and no longer fails with a great many pieces.
  • Pattern Studio: in Cut view the brush could paint a little above the cut. It now paints only below it.
  • Settings › What's new: "Tour of what's new" did nothing when the newest version had nothing to point at.

4.9.80

build 2026.11.08a · 8 Nov 2026

A new sketch bar, clean Pattern Studio brush, safer saving

New

  • Sketch: the new tabbed bar and tools (above), and a darker or larger cursor in the sketch (Settings in the sketch).
  • Sketch › Nodes: Ctrl+A picks every point of a curve, and Round turns points into round corners of the radius you type.
  • Settings › Display: grouping parts of different colours can keep their colours or make the group one colour, like Tinkercad. After Group a note says which, with the other choice one click away.
  • Community guides: a YouTube video button with notes on what each button adds; the guide's cover comes from the video; "Nearly there" lists exactly what is still missing.
  • Translations of the new texts in German, French, Spanish, Italian, Dutch, Polish and Portuguese, and the short ones in the beta languages.

Fixed

  • Sketch: clicks landed a few millimetres away and a smeared strip showed at the bottom when the window changed height (full screen).
  • Sketch: a design of several separate thin outlines (an SVG with "expand stroke") came out wobbly; separate shapes are now kept exactly as drawn.
  • Outline as a line: its inner side was jagged.
  • Dark mode: the view cube, rulers, picture cards and some panels stayed light, and some hand-picked dark colours were overridden.
  • Pattern Studio: the brush painted every triangle it touched, whole; Ctrl+Z after using a slider did nothing.
  • The wheel pressed (middle button) sometimes did not move the view, or seemed to act like the right button.
  • A group inside a group melted into one solid when the outer group had been resized and then ungrouped.
  • After choosing a grid step, Units, Rotate or Snap, the arrow keys changed the list instead of moving the part.
  • Start-up could write an older recovery copy over a project saved later.
  • Windows app: when it would not open after closing it (it took many clicks), it now keeps trying for longer, and the log says why.
  • When a project could not be saved automatically, the reason was lost; now it is shown with what to do.
  • Community guides: typing "/" in a guide jumped to the search box.

4.9.79

build 2026.11.06b · 6 Nov 2026

Pattern Studio, the new Measure, Cavity and Cut through, a rounder look

New

  • Pattern Studio (above): filaments for your printer (Bambu AMS, A1, H2D, Prusa MMU3 / XL), parts, layers, Undo and History, colours from a coloured scan, "Texture where this filament is", the overhang view, and how many layers deep the colour goes, written into the 3MF for Bambu Studio and OrcaSlicer.
  • A rounder look: pill buttons, fields and dropdowns, rounder panels and tiles.
  • A group's "more" button opens a tray of the same buttons under the group, instead of a list.
  • The protractor has its own button on the left view bar.
  • Align opens small (the hint and Exact align), and a dot whose alignment holds stays blue with a tick.
  • User guide links in the bottom bar and the Academy.
  • The Shapes panel starts three shapes wide.
  • Shapes › Print tests: a printer stress test (overhangs, bridges, holes, thin walls, stringing) to print and tune with.
  • Pattern Studio: a "One triangle" brush, and Alt + wheel changes the brush size.
  • Colours inside OBJ and GLB files (a texture picture, or colours per corner) can paint the part: Pattern Studio › Colours from the scan.
  • Bringing a design over from another editor: the parts appear in the view as they are made.
  • A tidier top bar: quieter Import and Export, Support as a heart, and in the web version the free Windows app is offered in More.
  • Tools: Simple / Advanced / Pro now in blues. Every tool is free: this only changes how many you see.
  • The top bar starts with Open, New and Projects; the Tools switch is at the right.
  • Storage box: a Snap-on hinge with nothing to buy: the lid clicks onto rods on the box, no bolts or pins.
  • Fillet and Chamfer: edges with no room at all (a sliver face beside them) are left sharp and the others are rounded, and you are told which; before, none were done.
  • Texture › Apply to › Faces I pick: click the faces that get the texture.
  • Big STEP files: over 150 MB you are asked first, with what helps; opening uses less memory.
  • Русский (beta): buttons, menus, panels and short messages in Russian.
  • Pattern Studio and the other new panels in German, French, Spanish, Italian, Dutch, Polish and Portuguese, and their buttons and labels in the beta languages.

Fixed

  • Windows app: if an updated version could not start (Windows Security or an antivirus stopping it), no program was left and the shortcuts did nothing. Now the version you had is put back, and it tells you.
  • Exporting over a file that another program has open (a slicer showing it) now says so, instead of Windows' own words.
  • Bringing a design over: Cancel now stops it (the parts still came before).
  • Projects: the pictures were blurry and squeezed.
  • In inches, small typed sizes and radii (such as .030) were turned into 0.1 inch.
  • Start-up could freeze for a long time with many neon signs or big sketches: they are now kept between sessions instead of being built again.
  • Edit mesh: moving a very big selection stopped with "Maximum call stack size exceeded".
  • Make bendable: a click after Undo could stop with an error.
  • Pipes: an arc whose first point was removed before the third click stopped with an error.
  • Tinkercad imports with groups could keep rebuilding: Stop is on the bar, and a group that never settles is left as it is.
  • Perfect Fit showed the "fit the view" icon.
  • Open panels (Pattern Studio's shares, physics, costs) now follow Undo and Redo.
  • Texture: a part painted in Pattern Studio keeps its painting when a texture is applied or taken off.
  • Tab in a size box now goes to the next size (Length, Width, Height), not to Keep proportions; Shift+Tab goes back.
  • A thick torus knot had its tube running through itself, which showed as crossing surfaces in slicers and STEP viewers: it is now one clean solid.
  • Holding the right button still to turn the view, then letting go, opened the menu: now only a quick right-click does.
  • Storage box with filament pins: the closed lid touched the box along its back, so it could not shut flat there.
  • Jar: its screw lid would not go on the jar on thinner walls (the lid's thread was cut deeper than the jar's). It now follows the jar's thread exactly.
  • Business card: changing a dropdown or colour just as the tool closed stopped with an error.
  • Connect to AI: when Claude Desktop starts the connector twice, the copy that could not get the port now keeps trying and takes over when the other ends, instead of answering "not connected" for good.

4.9.78

build 2026.11.05a · 5 Nov 2026

Smart Repair, new Sculpt brushes, Measure, lids and hinges

New

  • Smart Repair (above), and an Import report on every imported mesh: the file against what came in (triangles, size, volume, the file's header), and anything the import changed. Right-click an imported part.
  • Edit mesh: "To the seam" selects a bit (an arm, a handle) up to where it meets the body, and "Separate" makes it its own part, both closed.
  • Scale region: make one part of a model bigger or smaller, blended into the rest (right-click with a hole shape over the bit).
  • Cut out (keep the part, with a clearance), Punch (an outline through a body along X, Y or Z) and Hull (shrink-wrap parts into one).
  • Intersect first shows the shared part in green before you apply it.
  • Editing inside a group shows a bar with the group's name, Done and Cancel.
  • Joins work in the background: keep working while they are made.
  • Sequential numbering: copies of a text part counting 1, 2, 3…
  • Sketch: drag a piece of a line to bend it, type a point's position and its handles, mirror and join halves.
  • Trapezoidal and Acme threads; a Cherry MX keyswitch socket, stem and plate hole.
  • Laser Studio opens Illustrator (.ai) and PDF drawings (their paths).
  • Quick settings: "Sizes always shown" keeps the width, depth and height up while a part is selected.
  • With the units on inches, every tool panel's boxes and notes are in inches too.
  • The Generators menu comes in groups (names and signs, boxes and storage, toys and puzzles, home).
  • A user guide on simpcadx.com/guide, opened from the shortcut list (F1) or Ctrl+K "User guide".
  • Texture: holes are kept plain (up to a size you set), and painted areas are always textured.
  • Searching the Shapes panel puts the best name matches first.
  • Laser Studio, Thermoform, Storage box, Sculpt, Repair and the other newer panels in German, French, Spanish, Italian, Dutch, Polish and Portuguese.

Fixed

  • Connect to AI: the setup line used an npm package that doesn't exist; it now runs the connector that comes with SimpCAD X. The connection itself was blocked by the page's security policy: allowed now.
  • Windows app: would not open again straight after closing it. It now also opens where its window was last time.
  • Windows app: in full screen (F11, Present) clicks landed a few mm above the cursor.
  • Storage box hinged lids could sit up to about 1 mm high at the hinge.
  • Paste stepped copies along a diagonal: copies now make a straight row, repeating your last move.
  • A hole behind another part showed red as if it cut into it: red now only where a hole really meets a part.
  • A 28-million-triangle STL ran out of memory in the side panel; very big meshes are no longer held twice.
  • Puzzle maker's jigsaw, the Clock designer, Mold on a big scan and "Back up all designs" no longer freeze the window.
  • Simplify's bar stood still on very big scans, and "too big to save automatically" could go unseen.
  • A very big export's checks could be given up on a slower computer; they carry on, or you can export without them.
  • Opening a big STEP assembly while in another app could sit at "adding parts" for minutes.
  • A loft between sketches with square corners made a crease beside the corners.
  • Outline came out slightly angular round tight curves.
  • Measure read 0 mm for the thickness of a wall.
  • Tools on a part inside a group could show an error in the side panel.
  • Hollow with an open top cut the crown off a dome.
  • Pattern spaced copies 25.4 times too far apart with the units on inches.
  • Laser Studio's job preview showed each part once however many passes its layer had; it now goes through every pass.
  • Curved text bent inwards (concave) was not a closed solid.
  • The Shapes panel's category list could not be scrolled on smaller screens.
  • Update: checking when already up to date now says so.
  • Sculpt on a very detailed part: each stroke is stored about 2.5× faster.
  • Open in slicer no longer waits on a slicer that is slow to start.
  • Errors from browser add-ons are no longer reported as SimpCAD X crashes.
  • Sketch: pressing Enter in the size box after the line being drawn had gone showed an error.
  • Hollow / Shell on a big, detailed part with a thin wall could fail with "Map maximum size exceeded".
  • Web version: saving an export to a folder the browser won't write in (some folders on a Mac) failed; it now goes to your downloads, and says so.
  • A share link or a bug report sent with the design no longer uploads its reference pictures (the design keeps them).

4.9.77

build 2026.11.03a · 3 Nov 2026

Fixes: editing lofted sketches, big meshes, STEP on iPad

New

  • Opening a file from another design program (SketchUp, Fusion, SolidWorks, Inventor, Blender, FreeCAD, OpenSCAD) now says how to export it from that program so it opens here.
  • Opening a STEP file shows each stage (building the shapes, making the parts, part 3 of 128) instead of sitting at 0%.

Fixed

  • The rotate dial's numbers are now fixed to the world like other CAD programs (seen from above: 0° right, 90° at the top, anticlockwise is +), instead of starting from wherever you grabbed the ring. The readout shows the turn with its sign.
  • Sketches inside a loft or group that had been resized came back as plain shapes after Ungroup, so they could no longer be edited as sketches. They now stay sketches.
  • Edit mesh on a very big part (an STL of 2 million triangles) froze for seconds on every undo. Parts over its limit are now refused straight away, and undo and redo with Edit mesh open are several times faster.
  • Web version on iPad: after Safari lost its connection to its storage, every save failed until the page was reloaded. It now reconnects and saves.
  • Opening a big STEP file on a slower computer or tablet was reported as stuck while it was still working.

4.9.76

build 2026.11.02e · 2 Nov 2026

Laser Studio drawing tools, lead-ins and finger-joint boxes

New

  • Laser Studio: Pen (click for corners, drag for curves; click the first point to close), Arc (start, end, a point it passes through) and Trim (the piece of a line between two crossings, shown before you click).
  • Laser Studio PATHS: Round and Chamfer corners (true arcs; every corner, or the points you pick), Extend lines to the next line, Split where lines cross, Close gaps, Simplify, Smooth, Outline a line at a set width, and To outlines.
  • Laser Studio: double-click text to change its words.
  • Laser Studio: Box… with finger joints: every panel at its true size, grouped and named, ready to cut.
  • Laser Studio cutting layers: Lead-in and Overcut, Cut shared edges once, and Cut order (best order, or as listed in the Objects list). Fill layers: Cross-hatch.
  • The version and build are shown in the bottom left corner (handy when reporting a problem).
  • Laser Studio: Templates: save your set-up (machine, material, layers, and the shapes if you like) and start from it again, or take it to another computer as a file.

Fixed

  • Scan Studio: the Scanner panel said "The scanner list could not be loaded: HTTP 404" (the list was missing from the program).
  • Saving big exports (an STL of 1.6 million triangles, 81 MB) in the Windows app could stop with an empty .tmp file and the window looking stuck. Files are now saved in steps with a progress bar ("Writing 40 of 81 MB", then "Finishing"), and "Saved" only shows once the whole file is on the disk at its full size.
  • A save that cannot be finished (a folder held by OneDrive or an antivirus, a full disk) now says "Not saved" with the reason, leaves no empty or half-written file behind, and offers Save somewhere else…. In Edge and Chrome, a save that fails no longer leaves an empty file or quietly downloads instead.
  • Laser Studio could stop with "Canvas exceeds max size" when opened straight from Scan Studio (Firefox).
  • Searching for "Mesh" (Ctrl+K) offered an empty part that made the side panel stop working.
  • On a computer without its graphics driver (Microsoft Basic Render Driver) a big part froze the window: big parts are drawn lighter there, and SimpCAD X says once to install the driver.
  • A long job whose progress bar was still moving (Simplify of millions of triangles) was reported as stuck.
  • On computers with 8 GB of memory or less (Windows app) a long undo history could fill the memory and make saving slow.
  • Reloading the web page while it was starting was reported as a crash.

4.9.75

build 2026.11.02c · 2 Nov 2026

Connect to AI, Laser Studio editing, Thermoform and Storage Box

New

  • Laser Studio: Subtract makes real holes (a shape with an X-shaped hole stays one shape, engraves around the X and cuts it out); also Difference, Divide, Combine (keeps holes and curves) and Break apart.
  • Laser Studio: groups (also inside groups; double-click to work inside one, Esc to come out), lock, hide, bring forward and send back, and an Objects list with show, lock and rename. Each shape keeps its own layer in a group.
  • Laser Studio: Shift+click to add to the selection; a box dragged left to right picks what is inside it, right to left anything it touches. Copy and paste, also between projects; a right-click menu; shortcuts (Ctrl+G, Ctrl+K, Ctrl+L, Ctrl+H, Ctrl+[ and ]).
  • Laser Studio: SVGs come in as they look: white shapes over coloured ones become real holes, each colour gets its own layer, and the drawing's groups are kept.
  • Laser Studio: drag and drop SVG, DXF and pictures onto the work area; pictures are engraved, or traced into outlines. Curves and point editing (smooth, corner, line, curve, break, join, close).
  • Laser Studio: Align by groups with equal or set gaps, Step and repeat, arrays round a circle, and arrow keys that move by a step you set.
  • Thermoform: shapes (heart, circle, oval, egg, star, flower, hexagon, teardrop, pumpkin, bauble, ghost, rounded rectangle or your SVG), forms (dome, pillow, bowl, cone, tray), 20 mesh patterns, male and female moulds that follow the shape, joins for two halves, and forming notes for PLA, PETG and TPU.
  • Storage Box (Generators): outside or inside size, walls, compartments by ratio, finger scoops, lids (hinged on bolts or filament, lift-off, snap-on, sliding) with a snap catch, stacking, hand holds, a label recess, rubber-feet pockets, lid textures and text. Checked to fit and to print without supports.
  • Scan Studio and Laser Studio say what they are for when you open them with nothing in them yet.
  • Connect to AI (MCP), in Settings: read-only mode, a switch for exports, ask before deleting, the connected app's name, a list of what the AI did, and Disconnect. The connector (simpcadx-mcp) runs on your computer and only accepts SimpCAD X's own pages.

Better

  • Laser Studio: kerf and tabs are in the exported SVG exactly as the job preview cuts them; the scale handles move by exactly as far as you drag; Import stands out.
  • A test matrix for every Laser Studio and Scan Studio tool (docs/studio-matrix.md): what each does, the checks that prove it, and what still needs a real machine.

Fixed

  • Scan Studio: Reduce could open small holes along seams where a scan's corners differed in their last digits; Simplify in Design could do the same on meshes that are not closed solids.
  • Late timers on an idle Safari window were reported as freezes.
  • Exporting: the “Still working… press Stop” note no longer appears while the Save window is open waiting for you; once you have chosen where, it says it is writing the file.
  • Threads stay round: setting a thread's width or depth sets its diameter both ways. Screws, nuts, washers, inserts and bolts keep their real size when stretched (choose the M size and length instead), with a message.
  • A tool's card no longer pops up over the tools while you arrange the tool bar.

4.9.74

build 2026.11.02b · 2 Nov 2026

Laser Studio

New

  • Laser Studio: a work area sized to your machine (Bambu Lab H2D and H2S lasers, Snapmaker, xTool M1 Ultra, or your own GRBL laser), with rulers, grid, snapping and zoom.
  • Laser Studio: draw lines, rectangles, ellipses, polygons and stars, and text; bring in SVG and DXF drawings at their real size, photos, or the outline of a part from Design.
  • Laser Studio: exact Union, Subtract, Intersect and Offset, plus duplicate, mirror, align, arrays and Pack (fits parts on the sheet by their outlines, turning them where that helps).
  • Laser Studio: layers that say how each part burns: line or fill, power, speed, passes, line interval and angle, air assist, rows or rings fill, kerf (parts or openings at their drawn size) and tabs that hold parts in the sheet.
  • Laser Studio: photo engraving with Floyd–Steinberg, Jarvis, Stucki, Atkinson, Sierra, ordered or threshold dithering, or greyscale as power, with brightness, contrast, gamma and invert.
  • Laser Studio: a material test card (power across, speed down); pick the square you like and Use for this layer, and it is remembered for that machine and material.
  • Laser Studio: the job preview shows the order the laser runs in (engraving first, holes before outlines), the travel moves and a time estimate, with a slider through the job and its checks.
  • Laser Studio: export an SVG for Bambu Suite, xTool Studio or Luban (photos included), or G-code for GRBL, grblHAL, FluidNC, Smoothieware, Marlin and Snapmaker 2.0. Materials that must not go under a laser stop the export. Saved with your project, with its own Undo.

Fixed

  • Make it a Flexi pressed twice while it showed the bending preview could stop the 3D view.
  • In the web version, a design too big for the memory left could stop the 3D view while drawing it. Now the part that does not fit is left out of the view, once, with a message; the design is kept and still exports.
  • Exporting a very big design (over 2 million triangles) could run out of time on its checks: it now gets more time, and huge broken parts skip the slowest clean-up step.
  • The website app could report an error when the browser had no update service running.

4.9.73

build 2026.11.02a · 2 Nov 2026

Studios, a tool bar your way and a new Scan Studio

New

  • Studios: Design and Scan Studio in one switcher at the right of the tab row, apart from the tools. Inside Scan Studio the same switcher sits at the top right; Design goes back to your model with everything kept. Laser Studio is in it marked Soon and shows what is coming.
  • Arrange tools (right-click any tool, or More ▾): drag tools into the order you like, also into another group; × hides a tool and + brings it back; Reset puts the first layout back. Your layout is kept.
  • The tool bar has a handle at the end of its tools: drag it right to show more of each group's tools (past the window's edge they scroll sideways, with the mouse wheel or by dragging), left for fewer, down for every tool on more rows. Double-click: the usual number.
  • Scan Studio has its own work area round the 3D view, like the sketcher: its commands along the top, view buttons down the side, settings on the right and the scan's numbers below. The Health panel lists holes to tick and loose pieces, with Fix with Quick clean.
  • Scan Studio: Remove table cuts away the table or turntable scanned with the object; Make solid rebuilds a scan as one closed solid.
  • Scan Studio: Print colours turns a coloured scan (PLY or point cloud with colour) into up to 8 filament colours for your AMS, kept in the 3MF export.
  • Scan Studio hands a scan straight to Cut to fit, Hollow and Lasso cut, and the scanner list has 185 scanners from 25 makers, Bambu Lab among them.

Better

  • Every tool showing (the tool bar dragged down) is tidy: the rows end in a straight line and every tool is the same size with its full name.
  • Scan Studio is in every mode, not only Pro, and the old Scan clean-up tool is part of it.

4.9.72

build 2026.11.01c · 1 Nov 2026

Scan Studio, 73 new parts and 346 printers

New

  • Scan Studio (tool bar): its own workspace with your scans and their history on the left, settings on the right and the scan's numbers below.
  • Choose your scanner from 184 (24 makers) for import steps that fit it. Scan Studio opens the files its software exports; it does not control the scanner.
  • Open meshes (STL, OBJ, PLY, 3MF, GLB) and point clouds (PLY, XYZ, ASC, TXT, PTS, CSV): a closed surface is built from the points, and stray points are left out.
  • A health check lists every hole and loose piece and shows you each one. Quick clean, remove loose bits, smoothing that keeps the size, and fill all holes, holes up to a size or the ones you tick.
  • Reduce triangles with the change measured; lay flat, centre, cut a flat base, turn, set the real size or the file's units.
  • Line up two scans of one object and fuse them into one closed surface. Fit shapes finds the best flat face, sphere and cylinder and adds them as exact parts.
  • Scan Studio keeps the original with the scan, saved in the project: compare (figures, a chart and a colour map on the scan) or restore it.
  • New lesson: Clean up a 3D scan (Academy, Modifying Models).
  • 73 new parts: bowls, cups, planters, funnels, hooks, clips, boxes, cable tidies, spool hubs, hose barbs, pipe couplers, tees and caps, hose clamps, shaft collars, bearing holders, knobs, cranks, couplings, NEMA and T8 mounts, drag chain, V pulley, casters, superellipsoid, twisted prism, torus knot, Möbius strip, Archimedean solids and more.
  • The Tray, Stacking box, Vase, Jar, Phone stand, Display stand, Picture frame, Clock face and Duct adapter are in the library now, not only in Generators.
  • The bigger libraries open in sections with a description of each part. Move round the shapes with the arrow keys and press Enter to place one.
  • Settings → Display → Shape preview card: choose how soon the bigger picture appears when you rest on a shape (0.2 s to 2 s), or turn it off.
  • 346 printers to choose from (37 makers, each size checked against a source), and a new printer picker: search by maker, model or size, star your printers, recent and popular ones, and your own custom printers (make, edit, copy, export and import them).
  • Round (delta) printers get a round workplane and build volume. When a design does not fit the printer, it says which part and why, and offers to show it or move it onto the bed. It never shrinks your design.
  • Neon sign comes with its white diffuser cap: a separate part that covers the LED strip and spreads its light, ready to print. Signs made before can add one from their panel.

Fixed

  • Measure: clicking inside a hole or on a peg said Flat face instead of giving its diameter (4.9.71). In Round edges, clicking a curved face (an arch's underside, a hole's wall) picks its rims again.
  • Double-clicking the number on a slider to type a value often did nothing: a slight wobble of the mouse nudged the value instead. Now it opens the box to type in, and a click no longer moves the value.
  • About 30 library parts gave a broken or empty solid at some settings (gears with 5 or 6 teeth, a pipe bend at 0°, threads at their smallest, boards without mounting holes, small picture-frame windows, twisted rounded boxes, tall rail carriages). Every setting of every part is now checked.
  • A project's card in Projects could show an older picture and part count than the design inside it.
  • Typing new words into a neon sign kept its old size for a moment (stretched letters).
  • Danish: many words corrected (thanks to Henrik).

Faster

  • Crankshaft and camshaft: up to 96 s → half a second. Static hinge, cup handle, pipe fittings, air filter and long screws several times faster.
  • Make lighter / Reduce on flat-sided scans about 5 times faster.

4.9.71

build 2026.11.01b · 1 Nov 2026

Inches everywhere, a how-to video for guides, and fixes

New

  • Units: inch now covers the rulers in the 3D view and the whole sketcher: its rulers, grid, position, snap, the sizes in its panel, typed lengths and dimensions. Inside, sizes stay exact (2 in is 50.8 mm).
  • Community Academy has a one-minute video, How to write and share a guide, at the top of the Community page, and a Watch how link in the guide editor.
  • The Console: select just the lines you want and copy them (on touch screens too). Copy copies what you selected, or only the messages shown, such as the Errors.
  • A picture the lithophane can't read now says why: an iPhone HEIC photo (save it as JPG), a kind of file that isn't supported, a very big file, or a damaged one.
  • Connect points, Freeform surface and Model repair are no longer beta: they are always on the tool bar, without the BETA badge.

Fixed

  • After a long job on a big part (a Split of a very detailed model), the part could stay invisible with only its box showing.
  • Moving the mouse over a design with many parts could freeze the window for seconds.
  • Lasso cut on very detailed scans: the pieces that stay on are joined back in one go, and a slow cut says what it is doing.
  • Community Academy in the web version said it could not reach the server when you were signed in.
  • Round edges on a very detailed part (a scan): moving the mouse over it could freeze the window for seconds before a face lit up.
  • The History strip at the bottom of the 3D view covered the ruler there: it now sits just above it.

4.9.70

build 2026.10.31d · 31 Oct 2026

Community Academy and a much bigger Basic Shapes library

New

  • Community Academy, in SimpCAD Academy: guides by other makers, each checked by a moderator first. Search and filter them, mark them helpful, save them, follow creators and ask questions under a guide.
  • Follow a guide beside your model: its steps in a panel next to the 3D view, and your place kept. Its starter and finished projects open in a new workspace, never over your own design.
  • Write your own guide (sign in first): headings, steps with pictures, tips, settings, a YouTube video and buttons that open a SimpCAD X tool, with a cover picture and project files. Preview it, save a draft, then send it for approval. Your guides shows where each one is, and any questions on it.
  • Basic Shapes in sections that fold away and stay folded: Essentials, Geometric solids, Rounded & curved, Structural profiles, Holes & cutouts, Decorative profiles. Right-click a shape to add it to Favourites, and hover one for a larger picture and what it is for.
  • 15 new shapes: chamfered box, trapezoid, parallelogram and diamond prisms, cylinder sector (half and quarter cylinders, hollow ones, curved walls, pie slices), quarter and eighth sphere, D shape, ramps (curved and rounded), curved blocks (domed, dished, saddle), structural profiles (L, T, U, C, I, H, Z and T-slot, walls in mm), mounting tab, flange with bolt holes, standoff, gusset, keyhole slot, curved slot and scalloped circle.
  • 98 shapes and holes in Basic Shapes, among them rounded and hexagonal prisms, an elliptical cylinder, an ellipsoid, a cone frustum, and countersunk, counterbore, teardrop, D, T-slot, dovetail and tapered holes. Each keeps all its settings to change afterwards.
  • Sizes given in mm stay in mm when you resize a part: a flange's bolt holes and a profile's walls keep their size.
  • Polygon has Corner rounding, and Arch has an arch height for flatter elliptical arches or taller ones.
  • Search finds shapes by other words too (hexagon, half pipe, nut trap, i beam, oval), and by their names in your language.
  • With the Exact engine on, the new outline shapes export to STEP with true arcs and circles.

Fixed

  • Choosing Rename workspace a second time while the name was being typed stopped with an error, and the new name was not kept.
  • A computer that slept for a long time could be reported as a freeze.
  • Bringing over a very big design from another editor was reported as stuck while it was still working.

4.9.69

build 2026.10.31c · 31 Oct 2026

SimpCAD Academy: hands-on lessons beside your work

New

  • SimpCAD Academy (the Academy button, top right) replaces Learn: carry on where you left off, Start here, 9 learning paths, projects to make, and one search for lessons and tools.
  • 23 hands-on lessons that run in a practice workspace next to your own design, which is never touched. Each step checks what you really made (the size, a hole that cuts, a rounded edge, a saved file) and says what isn't right yet. Every step has Hint, Show me, Previous and Try again, and your place is kept if you stop.
  • The lesson panel sits beside your model and moves out of its way. Fold it to one line, drag it wider, or float it anywhere.
  • Tool reference: every tool with when to use it, how, its options, its limits and common problems, and the lesson that shows it. The ? on a tool's panel, in the sketcher and on the Export menu opens the right page.
  • Lesson text is in English for now; the menus and buttons are translated.

Fixed

  • Opening a project file could save that design into the project you had open, replacing it. An opened file is now a design of its own, named after the file (a file you renamed shows its new name).
  • Double-clicking a .scx file opens it in the newest SimpCAD X on the computer, not an older copy in another folder.
  • Measure reads a hole with a rounded rim as a hole (its diameter), not as a curved face.

4.9.68

build 2026.10.31b · 31 Oct 2026

Quality overhaul: Measure, Thicken, Lithophane, Voronoi, Community Shapes

New

  • Measure understands your part: click inside a hole for its diameter, two flat faces for the distance or angle between them, a hole and a peg for centre to centre and edge to edge. Copy any value with one click.
  • Thicken surface (right-click a part): an open surface (a STEP surface, a scanned shell, a single face) becomes a solid you can print, outside, inside or both ways, with the same thickness round bends.
  • Sketch: Extend (W) carries a line's free end straight on to the first line, arc or circle it meets and joins it there, so the outline closes.
  • Lithophane maker (Generators): any photo as a flat, curved or round lamp-shade lithophane, with a preview of how it looks with a light behind it.
  • Voronoi cut-outs (Generators): a rectangle, circle, hexagon or heart plate with an organic pattern of cut-outs, or only the cut-outs to cut the pattern into another part. Shuffle for a new pattern.
  • Community Shapes: right-click a part › Share to Community, and find shapes others shared in the shapes panel (Community). Every shape is checked before it is listed.

Fixed

  • Starting the new version while an older one was still open (its window, or in the background) showed the older one again. The new version now starts on its own, keeps your autosave safe, and asks you to close the old one.
  • Save as… under a new name: the design's name (top left) and the window title now change to the new name too, and from then on the design is kept in Projects under that name. The design you saved from stays as it was.
  • Joining and cutting parts that touch exactly (edge to edge or face to face) could come out slightly the wrong size. Every cut is now checked.
  • Undo no longer takes a press for a step that changed nothing.
  • Rounding a face's rim where it turns round an earlier rounding no longer leaves a thin wedge.
  • Simplify on scans and many downloads: over 3 minutes down to about 2 seconds.
  • The Split tool on a big scan: about 5× quicker per click.
  • Exporting a very big design as STL uses much less memory (the browser tab could close).
  • Exporting at higher detail no longer takes minutes on parts that are already very detailed: they go out as on screen, and a note says which.
  • 3MF part names with quotes, symbols or accents come back as typed. Very big GLB files come back the right size.
  • Flat faces with many holes (text, SVG, hole patterns, clocks) build up to 6× quicker, exactly the same shape.
  • On phones, every button on the top bar and tool bar can be reached again.
  • Ungroup says what it can do on a group inside a group, or on a part that isn't a group. With a pivot set, the turn handles turn round it.
  • A STEP file with no shapes in it says so plainly. The web version says plainly when it is offline.

4.9.67

build 2026.10.30b · 30 Oct 2026

Workspaces, reference pictures, STEP folders, big-file fixes

New

  • Workspaces: several designs in one project, as coloured tabs above the toolbar. Each workspace keeps its own parts, pictures, notes, camera view and undo history.
  • Workspaces: + adds one. Double-click a tab to rename it, drag to reorder, right-click to duplicate, change its colour or delete it. Right-click parts → Copy to workspace or Move to workspace. Every workspace is saved in the one project file.
  • Now and then, a small card in the bottom-left corner asks if you would like to support SimpCAD X: only after 30 minutes of use, never while you are busy, and at most once a month. Maybe later hides it for 30 days; Settings → Quick switches → Support reminders turns it off for good. Everything stays free.
  • Reference pictures (Image canvas) on any plane: front, back, both sides, top or bottom, offset and tilted at any angle. Trace in sketch draws right on the picture's own plane, so an extrusion or a revolve lands exactly on it.
  • Picture look: brightness, contrast, grey, invert colours and edges only, instant. Opacity can be typed. Rename, duplicate, replace (at the same scale) and reset placement. Every change to a picture can be undone.
  • Set scale in mm, cm, m or inches, with Reset scale; Keep proportions can be switched off. Straighten (4 points) makes a photo taken at an angle true to scale. Line up with another view scales and slides blueprint views onto each other.
  • Make it a part from a picture keeps the picture's own scale and place, and lands on its plane; uncertain bits are shown in orange and can be left out.
  • STEP files with an assembly keep their folders: each folder comes in as a group inside its parent group, every part with its own name, colour and place. Parts made of several separate shells (a surface model) come in as one part per shell. Exporting STEP writes the folders back, with the names and colours.

Fixed

  • Opening a big design could write it into the project that was open before: that project then showed the wrong design, picture and part count. Saves now wait until the design is open.
  • STEP export left out the colour of exact parts that had been moved.
  • Exporting a big design as a flat-faced STEP file could close the browser (950,000 triangles). It now finishes, says how big the file will be first, and suggests Simplify or 3MF when it would be too big.
  • Save as… with a very big design no longer stops the window for several seconds.
  • SVG curves drawn small and scaled up inside the file (Affinity, Illustrator) came in up to 4× coarser than the quality chosen.
  • Exact STEP export names any part that can't go out with true curves and asks first, and checks the finished file by reading it back (a part could be left out, or a sphere read back wrongly).
  • Exact joins and cuts of many parts are much faster (400 holes: 20 s instead of 5 minutes) and every result is checked.
  • Repair: single faces facing the wrong way are turned; Make one solid joins overlapping closed pieces exactly; a flat sheet is no longer called watertight.
  • An exact sketch whose outline has no area (points on a line, or crossing itself) is refused with a reason instead of making an empty part.
  • STEP surface models: shells that close up come in as true solids with exact curves (a 390-part aquarium file: all 390 exact, was none).
  • Design tree: a hidden part shows a red crossed-out eye, a locked part an orange closed lock (they only got a little fainter before).
  • Bringing in a detailed SVG straight as a part could stop the window for several seconds: it is now about 9× quicker.
  • The Exact engine stayed off for some people who had an earlier version (web and Windows). It is now on unless you switch it off yourself.
  • An exact sketch with a hole touching its outline (a notch drawn as a hole) came out slightly short with a gap in its surface.

4.9.66

build 2026.10.29c · 29 Oct 2026

The Exact engine is on by default

New

  • The Exact engine is now on for everyone: rounded edges, chamfers and STEP files use true curves. It is fetched once in the background (about 14 MB). Anything it can't do is made the usual way. Prefer the mesh engine? Untick it in Settings.

Fixed

  • The Exact engine check's report now says SimpCAD X, and whether it ran in the web version.

4.9.65

build 2026.10.29b · 29 Oct 2026

Scoop edges, threads that run out, safer saving

New

  • Scoop: a new kind of rounding in the Round panel. Outside edges get a round groove curving into the part instead of a round-over, for a neat line between parts or a finished edge on an insert.
  • Threads: "Thread ends: Run out". The ridge sinks smoothly to nothing over the last turn, so a cap or nut starts easily and there is no sharp step where the thread stops. New threads run out at both ends.

Fixed

  • Saving a very big design in Firefox stopped with "allocation size overflow". It is now tried again without the undo history, and if it still does not fit you get the plain "too big" window with Export as 3MF.
  • A bundle of closed parts now says "Watertight solid" instead of "Not fully closed".
  • The rounding Type menu was empty for a Foot; it now lists Round, Chamfer, Scoop and Foot.
  • Windows: the program is built in a way virus scanners are less likely to mistake for something harmful.

4.9.64

build 2026.10.29a · 29 Oct 2026

Exact engine: true curves for STEP parts, faster opening, 16 languages

New

  • Exact engine (beta): imported STEP parts keep their exact shape. Roundings, chamfers, holes and groups on them are exact, and STEP export writes their true curves.
  • Roundings and holes… on an imported STEP part: change a rounding's size or take it off, change a round hole's size or fill it.
  • Settings → Check the Exact engine: runs 30 test models and a big STEP assembly on your computer and makes a report you can send in.
  • The Exact engine in the web version, where the site offers it (downloaded once, then works offline).
  • Make bendable: new critters (fish, snake, caterpillar, lizard, bubble name, your own shape) with joints that avoid fins and legs.
  • Many more texts translated in every language.

Faster

  • Big designs open without freezing the window: parts appear as they are made ready, the window stays usable.
  • Designs of many parts open in a fraction of the time; the first drawing of every part is about 5 times faster.
  • Big compact designs open at once (no wait for "rebuilding groups inside groups").
  • Big STEP files open faster and show their progress; they are not reported as stuck while still being read.
  • Split on a tube or similar part: much faster.

Fixed

  • Edit rounding on picked faces: a click on the part could stop with an error.
  • A rounding along a curved rim no longer shows creases.
  • Split exactly along a face no longer leaves a thin sliver.
  • STL export of a multi-colour group gives one clean solid.
  • Cut to fit: pieces are checked again after being laid out.
  • The Joints panel no longer covers the History bar.
  • Touch: quick double taps are no longer missed while a frame is drawing.
  • Sketch: the plane list is labelled "Draw on" (it was translated wrongly in some languages).
  • Sign-in to the cloud asks for the code shown on the sign-in page.

4.9.63

build 2026.10.28b · 28 Oct 2026

Edit roundings, delete pictures, Danish (beta)

New

  • Edit rounding (edges and size)…: change a rounding after Apply. The Round panel opens with its edges picked; Cancel keeps it as it was.
  • Pictures (Image canvas) can be picked and deleted like parts: click one in the view or in the new Pictures list in the Design tree and press Delete, or right-click it for its menu. Undo brings it back.
  • Texture: give several selected parts the same texture in one go. The paint brush shows its size as a circle.
  • Edge lines switch (Quick switches) for a smooth look without the dark edge lines.
  • Design tree: Shift-click selects a range of parts; Ctrl-click adds one.
  • Circular and spiral patterns go round your pivot point when you have placed one.
  • Right-click on empty space can hide the workplane; a hidden workplane hides the shadows too, for a clear look from below.
  • Danish (Dansk, beta).

Fixed

  • 3MF files saved in the ZIP64 format open (they stopped with "Offset is outside the bounds of the DataView"). A damaged file says so.
  • Texture: the pattern list keeps its place when you pick a pattern.
  • Make bendable: showing the bend again while it was still moving could stop with an error.

4.9.62

build 2026.10.28a · 28 Oct 2026

Big designs group and save reliably, cleaner rounded rims

Fixed

  • Grouping big designs no longer gets stuck on "Building group…" or runs out of memory (it could take over 10 minutes and then close).
  • Saved projects stay a sensible size: undo history kept each drawing (imported SVGs) once per step, so some files grew past 500 MB and could not be opened again. Open and save such a project once to shrink it.
  • Rounding a whole rim after rounding one of its corners now gives a smooth corner (it was rounded edge by edge, with creases).
  • Split connectors move with the cut plane however you move it, are placed in the walls of hollow parts, and the fit check warns when one is not on the part (they could cut through the far wall).
  • Tongue & groove connectors can be turned to run along their wall.
  • Cloud projects: if your Drive folder is removed or put in the bin, your projects on this computer are kept and copied up again (they could be removed). A same-named project on a newly signed-in computer is kept as both.
  • Saves that fail now say so, and a very big save is never cut short over the good file.
  • Text dropped onto a small curve (such as a raised letter) is no longer wrapped round it.
  • Copied parts keep their links: a hollow's cap and a group's moving part follow the copy; a cap keeps its link after saving and opening.
  • Pressing Group twice on a slow group no longer makes two groups.
  • Imports: minified SVG arcs, odd binary STL files, OBJ files with bad or many-sided faces, inch 3MF files and compressed or quantized GLB files read correctly (or say why not).
  • Sketch: Done keeps a line you are still drawing; shapes without a colour are kept with Separate colours; guides can be undone; text whose font arrives late is drawn.
  • Exports that fail say so, and STEP files can be picked in the Open window.

Faster

  • Edit mesh: Mesh detail is about three times quicker and no longer freezes the window.
  • Undo and redo with very big parts are instant.
  • Joining, cutting and rounding big parts start about twice as fast; split connectors on big parts about twice as fast.

4.9.61

build 2026.10.27e · 27 Oct 2026

Steadier saving and exports in the web version

Fixed

  • Web version: a tab left open from an older version keeps exporting after the site updates (it stopped with an error).
  • Web version on iPad: saving keeps working when the browser closes its storage in the background (autosave failed until the page was reloaded).

4.9.60

build 2026.10.27d · 27 Oct 2026

Exports work again, Exact engine steadier

New

  • Exact engine (beta): flat-faced parts (icosahedron, dodecahedron, pyramid, wedge) are rounded exactly too, including three edges meeting at a corner.

Fixed

  • Saving and exporting (STL, 3MF, OBJ, GLB, SVG, Send to print) work again: 4.9.59 stopped with an error.
  • Exact engine (beta): rounding every edge of a part uses it too, so the result is the one the preview showed.
  • Exact engine (beta): on a slower computer its first load is no longer cut short (rounding then fell back to the usual way).
  • Exact engine (beta): its one-time download comes from the update server, or the website if needed.

4.9.59

build 2026.10.27b · 27 Oct 2026

Exact engine (beta), quicker text and undo

New

  • Exact engine (beta), Windows app: turn it on in Settings for rounded edges and chamfers with true curves, STEP export with true curves, names and colours, and opening STEP files. Off unless you turn it on; it asks first and downloads once (about 14 MB).
  • With the Exact engine on, the Round panel's preview is the very result Apply makes.

Faster

  • Typing in a text with a plate or rounded letters is much quicker (it could stop responding).
  • Undo and redo are instant with text in the design (they could stop responding).

Fixed

  • The web version recovers by itself if its geometry engine fails to load at start-up.

4.9.58

build 2026.10.27a · 27 Oct 2026

Bosses in a grid or ring, clearer Round panel

New

  • Ribs & bosses: place bosses in a grid (columns, rows, spacing) or a ring (how many, diameter, turn) in one go, centred on the face or where you click, each with its screw hole. You see them before you click.

Fixed

  • Round panel: when a size doesn't fit, the message now uses your units (it said mm while you worked in inches).
  • Round panel: the word "null" no longer shows when no size fits.
  • Copies are named "(copy)", "(copy 2)" and so on, so you can tell them apart in the Design list.
  • Windows app: no longer closes at start when its window can't open; it opens in Edge instead.
  • The first-time tour no longer appears on top of the What's new window; it waits until that is closed.
  • Send to SimpCAD X: the What's new window no longer opens over the design being brought in.

4.9.57

build 2026.10.26a · 26 Oct 2026

Big drawings no longer run out of memory, History moved to the corner

Improved

  • History sits in the bottom-left corner now, so the middle of the ruler can be read.

Fixed

  • Designs with SVG layers, text or other big drawings: every undo step kept its own full copy of each drawing, so after a few hundred steps the program could run out of memory and the window went white. The steps now share the drawing, and saving (with its History) is many times faster.

4.9.56

build 2026.10.25c · 25 Oct 2026

SVG layers of different sizes line up

Fixed

  • SVG layers: a layer that reaches further out than the others (a shadow, an outline) now comes in at the same scale as the layers already in, so it lines up, also after the first layer was resized. The import box says so, and warns if a different size would stop it lining up.

4.9.55

build 2026.10.25b · 25 Oct 2026

Surface texture rebuilt, faster and cleaner Hollow, Fillet and Split

New

  • Surface texture rebuilt: smoother results with no jagged steps, 31 patterns in groups (Natural, Tiles, Grip, Fabric, Your image), tile width and height set apart, shift across and up, Push in, out or both, outside only or all faces, keep the top or bottom flat by angle, paint where it goes with a brush or fill, and a Wrap choice with Transition. Older textures open as before.
  • Texture from your own image or SVG drawing. The top now gets the texture too; only the bottom, on the bed, stays flat.
  • Round panel: a "Horizontal edges" quick pick (rims, steps and shelves at any height); hold Shift on any quick pick to add to what is picked.
  • Round panel: new Foot mode. The bottom rim of an upright part is rounded off the wall and then runs straight to the bed at the angle you set (15–75°), for a printable foot with no elephant's foot.
  • Repair: when gaps are too big to close, it offers "Rebuild as a solid" (one undo step), and the rebuild always comes out as a clean closed solid.

Improved

  • Hollow on parts made of upright walls and flat floors (plates with holes, brackets, trays): an exact inside in a fraction of a second. A plate with 24 holes took 15 seconds and came out broken; now 0.2 seconds and clean.
  • Hollow on organic parts about twice as fast with the same walls, and balls and domes twice as fast.
  • Fillet on detailed curved parts no longer freezes the window (46 seconds with a 25-second freeze, now 10 seconds with none).
  • Fillet on plates with round holes: a third of the triangles for the same shape, twice as fast; honeycomb plates with every edge rounded in 1.5 seconds instead of 38.
  • The checks every tool runs (Fillet, Hollow, Texture, export) are several times faster.

Fixed

  • Split: cutting a detailed part could leave a piece with small gaps on the cut face. Both pieces now come out closed.
  • Hollow: a rare hair-thin tunnel through the inside of organic parts.
  • Texture: hair-thin cracks where the pattern squeezed two corners together, and surfaces pushed through each other in narrow valleys.
  • SVG layers line up again after undo, redo and reopening the design.
  • Tools as drop-down menus: every tool is in its menu again (some were missing).
  • STEP files: instead of "Unsupported file type" it says plainly that STEP can't be opened yet and how to bring the part in (export STL, 3MF or OBJ from the CAD program).

4.9.54

build 2026.10.25a · 25 Oct 2026

Inches everywhere, Align panel, shortcuts list

New

  • Align panel: line parts up on X, Y and Z separately (min, centre or max), choose which side of each part lines up, add an offset, and pick an anchor part that stays put. Shown live before you apply.
  • Keyboard shortcuts: press F1 or ? for every shortcut, in groups, with a search box.
  • Workplane facing into a part: Shift+click the face, or press Alt+W to turn the current one round.

Improved

  • Inches: with Units set to inch, the sliders in every panel (key tag and other generators too) show and take inches, the Grid steps are inch steps (1/64 to 1 in, plus Custom… with fractions like 3/8), and the workplane has a line every 1/8 in.
  • Arrow keys: with Snap set to Off they move in fine steps (0.1 mm, or 0.01 in), Shift for 10 times as far. Seen from the front or side, Up and Down move up and down.
  • A new polygon comes in as a regular shape (a hexagon looked stretched) and stays regular when you change its sides.
  • Bringing in 3MF and OBJ parts is much faster, and the window keeps answering while it works.

Fixed

  • Split / Connector: no longer breaks when only one piece comes out of the cut (it says why instead).
  • Sketch: Close gaps no longer fails when a picked point is joined away; opening the sketch twice no longer makes keys act twice.
  • Hollow works on a part that was left switched off inside a group.
  • Undo while Align is on no longer leaves it moving the old parts.

4.9.53

build 2026.10.24e · 24 Oct 2026

Big brought-over designs: history fixed, rebuild progress shown

Improved

  • The Rebuilding note shows how many groups of how many are done, with a percentage and a bar, so you can see how far it has got.

Fixed

  • Going back or forward in History on a big design brought over from another web editor no longer works out every group again from scratch. On a design with thousands of parts it could run out of memory and the screen went white.

4.9.52

build 2026.10.24d · 24 Oct 2026

Rounding tight edges, SVG layers line up

Improved

  • Fillet: a few edges too tight for the size no longer stop the rounding. The rest are rounded at the size you asked, and the tight ones get the most that fits.
  • SVG import: layers of one drawing saved as separate SVGs (same page) line up exactly as drawn when you import them one after the other.
  • A hole that has moved inside a solid now shows red, so you see at once when it has gone into a part.

Fixed

  • Designs brought over from another web editor stay exactly where they were there, even when a part sat below its workplane (set the bookmark up again to get this).
  • Brought-over multicolour groups keep their colours exactly as the editor showed them, with clean edges between colours.
  • Brought-over groups of holes no longer cut away too much (each part’s own solid or hole setting is used).
  • Ungrouping a brought-over design shows its parts straight away (they could seem to vanish while the rest of a big project was still being worked out).

4.9.51

build 2026.10.24c · 24 Oct 2026

Brought-over designs sit on the workplane

Fixed

  • A design brought over from another web editor sits on the workplane again. It could float above it when a part inside a group reached lower than the finished shape (cut off by a hole, or hidden).
  • Performance mode on slower computers: the part filling the view no longer looks rough and broken while you drag something next to it. Small, far-off parts are still drawn lighter to keep dragging smooth.
  • Right-clicking a part opens only the SimpCAD X menu: in the web version on Windows the browser’s own menu no longer opens on top of it.

4.9.50

build 2026.10.24b · 24 Oct 2026

Bring designs over, still editable

New

  • Bring designs over: the arrow next to Import → Bring a design over… gives you a Send to SimpCAD X button to drag to your bookmarks bar (on an iPad or phone: Copy the bookmark). Click it on a design open in another web 3D editor and SimpCAD X opens in a new tab with the design in it.
  • What comes over: boxes, cylinders, cones and tubes as shapes you can still change; other parts as meshes; holes, groups (inside groups too), colours and hidden parts kept. Groups ungroup as usual.
  • Nothing is uploaded: the design goes from one tab to the other on your computer. When it arrives it is in Projects, with Save to my Google Drive and Download .scx right there.
  • Big designs show in seconds (groups come with their finished shape); the groups inside them are worked out in the background while you carry on.
  • If the new tab is blocked, the bookmark offers to open it, or to save the design as a .scx file to drag in. In the Windows app the bookmark always saves the file.
  • Importing OBJ, GLB, 3MF or a zip of parts: boxes, cylinders, spheres, cones, wedges, roofs, pyramids, polygon prisms and tubes come back as editable shapes. Only an exact match is replaced; everything else comes in as a mesh, unchanged.

Better

  • Hollow: a part that already has a sealed empty space inside (some downloaded models do) is hollowed right through, so a screw cap fits; the panel says so.
  • Designs with thousands of groups update much faster after a change.
  • Shape pictures in the shapes panel are kept between visits; on very slow devices plain tiles are shown instead of holding the window.
  • On computers with 4 GB of memory or less, the oldest undo steps are let go sooner, before the computer slows right down.
  • Start-up and opening a design never wait long for a font: the text is made as soon as the font arrives.

Fixed

  • Fillet with every edge of a twisted, tapered or bent box picked no longer stops with an error.
  • Sketch: Join on corners held by some constraints no longer stops with an error.

4.9.49

build 2026.10.23f · 23 Oct 2026

Hollow with a screw cap

New

  • Hollow starts as Sealed: the inside is emptied and nothing is opened. Faces are only opened when you choose Open faces.
  • Screw cap: print-friendly or metric thread, size, pitch, clearance, thread length, 1–4 starts, right- or left-hand; the cap with a recessed head (the part still stands flat) or a raised flange; coin slot, hex key socket, knurled edge or grip ribs; a groove for an O-ring; words engraved on the cap. A collar inside the part carries the thread.
  • The cap goes on the underside by itself (the lowest, flattest spot with room inside), or wherever you click. If it doesn’t fit, Hollow says why and offers the biggest size that does.
  • Push-in plug: a tapered hole and the matching piece, flush when pushed in.
  • Cut open flat: slices a figure, vase or planter flat on any side for a clean open rim; the part shows in orange what comes off.
  • Preview before applying, worked out in the background (Stop works): original, hollowed, cap fitted, exploded and cut-away views, thin spots marked in red.
  • Checks on every result: closed solid, separate pieces, real wall thickness (typical and thinnest), parts too thin to hollow, the cap clear of the part when fitted, clearance too tight or too loose, material round the thread. Problems come with a fix (a thinner wall, a smaller cap, repair the part first).
  • Edit hollow: change any setting later; the cap is remade to match. The cap can be fitted in place to look at, and put back beside to print.
  • Presets for FDM figures, FDM containers, resin prints and resin miniatures; Detail (draft, normal, fine) for organic shapes.

Better

  • Hollowing scanned or generated figures is about twice as fast, and their thin parts (ears, toes) no longer leave faults.
  • Side buttons in Open faces are greyed where the part has no flat side (on a figure, "open top" used to cut stripes all through it).
  • Arrow keys with snap distance Off move 0.1 mm per press (Shift: 1 mm); they used to move 1 mm.

4.9.48

build 2026.10.23e · 23 Oct 2026

Rounded parts show as closed solids again

Fixed

  • After a fillet or chamfer, the part's panel said “⚠ Not fully closed” even though the part was a sound closed solid (Repair and “show me why” found nothing). Roundings now show “✓ Watertight solid”, also ones made with 4.9.46.

4.9.47

build 2026.10.23d · 23 Oct 2026

A top bar that always fits

New

  • Right-click the top bar to choose which buttons it shows. The ones you hide are still in ☰ More, which also has “Choose what the top bar shows…”.

Fixed

  • The top bar could run off the side of the window (cutting off the last buttons) when what is on it grew after the program started: the computer meters, a long design name, Saved. It now always fits, moving what doesn't fit into ☰ More; the meters and the Performance switch fold away too when room runs out.

4.9.46

build 2026.10.23c · 23 Oct 2026

Roundings you can trust, rulers and actual size

New

  • Rulers (on the left of the view): millimetre rulers along the bottom and the left, marking where the selected part starts and ends and how big it is.
  • Actual size (1:1, on the left of the view): turns the view straight on and zooms so 1 mm on screen is 1 mm in real life. Right-click it to check your screen against a bank card; it remembers the result.
  • Shaped pegs for Split and Lasso cut: a triangle, square, hexagon or round peg, straight or tapered, built on (plug), loose (dowel) or as a snap. A triangle peg is the most self-centring.
  • Round panel: a live check says whether the rounding can be made. If it can't, it says why, offers the largest size that fits (Use … mm), and shows the edges that can't take it in red. Apply waits until it fits.
  • Hidden parts: an eye button with a number appears on the left of the view while parts are hidden; click it to show them all again (or Ctrl+Shift+H). Hiding a part also offers Show again.
  • Rename a part from the design tree with F2, or right-click it → Rename… (double-click still works).

Better

  • Roundings on curved faces (a hole's rim, a cone, a dome, an arch) are read from the part itself, so they meet those faces smoothly, without ridges or steps.
  • Three picked edges meeting at a corner get a proper round ball corner; inside and outside edges meeting at a corner can be picked together (the inside ones are done first).
  • Rounding a part that is already rounded (the top rim first, then the upright edges, or the other way round) blends cleanly into the earlier rounding, all the way to where it fades away.
  • A rounding that changes size along a curved edge follows the curved faces too.
  • Rounding the outline of a flat part (a sketch pulled up, a plate with holes, text, an L-bracket) is made exactly in one go, whichever way the part lies.
  • Clicking a flat face rounds every edge round it, checked the same way as edges picked one by one.
  • The Round panel's preview is exactly what Apply makes, at the same smoothness.
  • Hole pattern: hundreds or thousands of holes go straight into one hole group, so the program no longer stalls while making them.
  • Web version: when you open a slicer, the message explains that the browser can't start programs, and that starting a slicer directly (your own slicer and its command line too) works in the Windows app.

Fixed

  • A rounding could leave hairline ledges, thin slivers or notches where it met a curved face, or quietly use a smaller size than asked. It is now either clean and the size you asked for, or not made at all with the reason.
  • Rounding the upright edges of a box whose top was already rounded left a small mark at each top corner.

4.9.45

build 2026.10.23b · 23 Oct 2026

History you can scrub, push/pull, mates and parts lists

New

  • History: drag along the steps at the bottom of the view to scrub through your design, step by step (Esc while dragging goes back to where you started). ← and → step through it too.
  • History: “Restore this version” brings the step you are looking at back as a new step at the end. Undo takes it back, and every step after it stays in History.
  • History: go back and change something, and the steps you had gone back past are kept as another version (History → Versions). Switch between versions any time: the one you leave is kept too.
  • History: right-click a step to give it a name (“Before the lid”). Named steps stand out on the strip and are listed in Versions, so you can come back to them, also after closing the project.
  • History: show only the steps of the selected part (its history follows it when it is copied, grouped or renamed), or hide the small steps (colour, show/hide, rename, lock).
  • History, its named steps and the other versions are saved with the project: they are there after closing and opening it again, and on your other computers with cloud projects. Only what changed from step to step is saved, so long histories stay small and quick. Older projects open as before.
  • Push/pull (Modify, or right-click a face): click a flat face of any part (also a tilted face, an imported model or a group) and drag it out to add material or in to cut, or type the distance. It stays a step: select it later to change the distance, or turn it off.
  • Sketch from a part (Create → From part, or right-click a face): click a flat face and the sketcher opens on that face with the face’s outline already drawn as lines you can change. Done makes a new part standing on the face.
  • Ribs & bosses (Modify → Bosses): a screw boss with its hole, a stiffening rib, or a corner gusset, put on a flat face with a click or two. They join the part as its own pieces inside a group, so you can still resize them or turn them off.
  • Pattern → Along a path: copies follow a line or a curve from end to end, or go all the way round an outline, turning with it. Change the path later and the copies follow.
  • Variants (Modify): keep several versions of one design in the same project (Small and Large, with and without a lid). Each remembers your Parameters and which steps are turned off; a table compares them.
  • Parts list (Assemble): every part counted (the same parts on one line), with its size, material, filament weight and cost, plus the screws, nuts and bearings to buy. Save it as a spreadsheet (CSV) or copy it.
  • Mate (Assemble): click a face of the part to move, then the face it goes against: the faces go together (or line up side by side), with a gap and centred if you like. Move the base and the mated part comes along; move the mated part and it slides along the face.
  • Design tree: turn any step off and on with its power button. An operation (fillet, hollow, pattern, push/pull…) passes its part through unchanged; a part inside a group is left out and the group rebuilds without it.
  • Design tree: a step that is rebuilding shows it, a step that could not rebuild shows ⚠ (point at it for why), and parts that follow Parameters or a mate are marked.
  • Drag the edge of the design tree or the shapes panel to make it wider or narrower. The shapes fill more columns as it gets wider and get smaller when it is narrow. The widths are remembered; double-click the edge for the usual width.
  • Drag the bottom edge of the tool bar: up for icons only (more tools fit), down for every tool showing with its name. Also in Customize toolbar, and in the menu when you right-click a tool.
  • Favourite tools: right-click any tool → Add to Favourites (or ★ in Customize toolbar). Your favourites sit together at the start of the tool bar.

Better

  • Rounding every edge of a flat part (a star, text, a plate, a sketch pulled up): clean flat walls with no streaks, no seams, and always a closed solid, also on imported or remeshed parts. It is quicker too, and the preview now shows the real result instead of a tangle of lines.
  • Sweep: draw the shape and the path in the same sketch, select it and press Sweep. Corners in a line path are mitred like a picture frame; very sharp ones are rounded so the shape can't fold. Where the path bends tighter than the shape is wide, you're told.
  • Thin lines (a sweep path, a line in a sketch) are easier to click: a click just next to the line picks it.
  • Snap to centre: drag a part over another and its middle clicks onto the other's middle, both ways at once (great for centring a cut-out). Align has a bullseye too: one click centres the selected parts on the biggest one.
  • Make bendable: Show it bending swings the slices on their hinges as far as they can go, and the panel says how far the whole part bends.
  • Learn → Tool guide: “Good for” and “Good to know” for the tools that needed more explaining, like Sketch (what nodes are, and every drawing tool), Sweep, Lasso cut, Loft, Shell and Fillet.

Fixed

  • Saving a very big design to Projects (also when you press New) no longer freezes the window: the design is written in the background.
  • Sketcher: Join on the two ends of a line that had a dimension no longer stops with an error.
  • Rounding edges: no more error after going back in History or grouping while the rounding tool was open.
  • The bottom edges of a part whose top edges are rounded can now be picked for rounding or a chamfer (and other straight edges beside a curved surface).
  • Exporting on a computer short of memory: the checks are done anyway instead of being skipped.
  • Cloud projects: a project saved straight after it was synced is now always sent on the next sync.

4.9.44

build 2026.10.22k · 22 Oct 2026

Box maker, Word fill, tablet fixes

Fixed

  • Export: on a phone, a tablet or a short laptop screen the top of the list (STL, 3MF, OBJ) was cut off. Long menus now start at the top of the window and scroll.
  • Rounding a flat part all over (a sketch or an imported outline pulled up) is smooth again: the last version used a coarser step, which left small roundings looking faceted.
  • Tablets: Import and other file pickers let you choose STL, 3MF and design files (they were greyed out on an iPad); swiping up and down over the shapes or a panel scrolls it; the bottom of the screen is no longer cut off.
  • The black lift arrow stays on top of a part that has been turned upside down (it was drawn at the bottom).
  • The bottom bar always stays on one row (on smaller screens the extra links and then the words in front of the boxes fold away), instead of stacking into two.
  • Text in script and decorative fonts (Magneto and the like) no longer has missing faces where the strokes of a letter overlap.
  • Opening a sketch next to a very detailed part (hundreds of thousands of triangles) no longer freezes the program for a minute or more.
  • Web version: a normal reload always picks up a new release (until now the old one could keep coming back until the page was force-reloaded with Ctrl+Shift+R). It still opens without the internet.
  • iPad and tablets: the whole screen fits in portrait and landscape (the bottom was cut off under the browser's bars), and the shape names show in full.

New

  • Grouping parts of different colours keeps each part's colour (a purple outline round black letters stays two colours, ready for a multi-colour print). Turn off Multicolor in the group's colour picker for one colour.
  • 44 free fonts come with the program, in every text tool and in the web version too: chunky ones for printing (Anton, Bebas Neue, Bangers, Archivo Black, Titan One, Luckiest Guy…), scripts (Lobster, Pacifico, Dancing Script, Great Vibes…), and clean ones (Montserrat, Poppins, Lato, Oswald, Nunito…). Your own fonts can still be added.
  • Quick switches → Start in orthographic view: the program opens without perspective (O still switches any time).
  • Ctrl+D after moving or turning a copy repeats that move and turn, and now says so (a box turned a quarter and copied again turns another quarter, which can look unturned). Ctrl+C, Ctrl+V gives a plain copy.
  • New text starts in the font you used last.
  • Export → Change slicer…: “Your own slicer” for portable copies and forks. Choose its program, add the words it should start with (a separate data folder, for example: --datadir "D:\Orca\data" {file}), and Print opens your design with them.
  • A test layout to try (Quick switches → Test layout: CAD-style): the file buttons top left, the edit and group buttons up on the top bar so the tool bar has room for more tools, Updates / Support / Feedback / Learn in More, and the performance meters and Simple / Advanced / Pro on the bottom bar. Switch it off to go back; the usual layout stays the default.
  • Bottom left, under the design tree: who makes the program, and a link to support it on Ko-fi.
  • Box maker (Generators): a box of flat panels that slot together. Many-sided (3 to 12) or a rectangle; sizes outside or inside; material thickness; how far in the walls sit; tabs per wall (or automatic); lid or open top; dividers front to back and side to side in a rectangle, slotted together half way. For a 3D printer the slots get a little clearance; for a laser cutter the kerf is allowed for. Pieces come out flat, ready to print or to export as SVG, or put together to see the box.
  • Word fill (Generators): words that fill a heart, a cross, a circle or rows. Each row is stretched to fill the shape at its height, the letters and rows overlap so it is one piece, and a frame holds it together. On a cross, rows in [brackets] go on the crossbar. Green dots check for loose pieces and joins thinner than you set. For printing the letters can stand up from the rest; for a laser it is one outline (Export → SVG).

4.9.43

build 2026.10.22c · 22 Oct 2026

Mold maker, open any face when hollowing

Fixed

  • Grid snapping: a turned part lands back on the grid by itself when you let go of the rotate handle (or turn it with [ and ]), so a 21 × 20 box turned a quarter no longer sits half a step off until it is dragged. A free turn (Ctrl) stays where you put it.
  • Physics drop: a part that lands balanced on a point or an edge (a cone on its tip, a box on one edge) now falls over the way it really would, instead of staying perfectly balanced. Parts that really stand still stand.
  • Ctrl+Z while rounding edges takes back the edges you picked, one at a time (it used to undo a step from before, like moving another part). After the fillet, Ctrl+Z undoes the fillet first.
  • Pressing Done on a very big sketch (a detailed imported drawing) is about ten times quicker.

New

  • Hollow body: click faces on the part to open them, as many as you like and at any angle. Each picked face is shown in orange (click it again to un-pick); Hollow leaves just those faces open, with the wall round each opening kept at the full thickness. Picking a face switches off the side buttons chosen before (tap a side to open it as well). The part panel says which faces are open.
  • Mold maker (Mold, next to Shell; or right-click a part): a block round the part, split in two where the part is widest (or wherever you slide it), opening up and down, front and back or left and right. Locating keys (bumps on one half, sockets with a little clearance on the other), a pour hole down to the part's highest point and an air vent. The halves come out ready to print beside your part, or closed as they fit; it tells you how much casting material it needs.
  • Mirror: a turned part flips along the ground's X, Y and Z (choose “Its own sides” to flip along the part as it is turned, as before).
  • Hole pattern: the holes are kept together as one group inside the result, so ungrouping gives you the part and one group of holes to move, not dozens of loose ones. “Don't cut yet” makes just the hole group, to move into place first. One Ctrl+Z takes the whole pattern out.
  • Torus: stretched to an oval, the tube stays the same thickness all the way round.
  • Sketch: lines and arcs drawn with the Line and Arc tools and left open (a path for a sweep) keep their shape when you press Done (they came in as a small block), on any plane. A selected line can be made an arc and an arc straight again (and its bend flipped).
  • Sketch: paths drawn with the Pen stay editable curves: in Nodes, click between two points to make that piece straight or curved. While drawing with the Pen, Spline or Line, Finish (open) and Close the shape are on screen. Spline: Shift+click puts a sharp corner straight away.
  • Pictures brought in (PNG, JPG…) can be dragged to move them straight away, without opening Image canvas first. Lock one to keep it put.
  • Image canvas: “Make it a part…” turns the picture into a part (or a sketch) with the same choices as Import SVG (filled or lines, height, size), right over the picture. A photo or drawing is traced first (cut-off, detail, invert); an SVG uses its own shapes. The Image canvas now takes SVG files too.
  • Sketch: a Dots tool for tracing by hand: click dot after dot round the outline of a picture, straight between them or smooth through them; Backspace takes the last dot back, the first dot closes it. Trace in sketch (Image canvas) opens it ready to go.
  • Logo tool: “Make it a part or sketch instead…” brings the logo in with the Import SVG choices.
  • SVG import reads more files: shapes placed with <use> and <symbol>, styles set by class, files that aren't quite valid XML, and text (drawn in the built-in font). When nothing can be used, it says why (only a picture inside, text not turned into outlines, hidden layers).
  • Arrow keys with the workplane on a face: the part now moves across that face, the way the arrow points as you look at it (it used to move along the ground). Ctrl or Alt + Up / Down takes it off the face or back towards it.
  • Sketch: the On list at the bottom of a new sketch has “A face of a part… (click it)”. The sketch steps aside, you click a flat face, and it comes back drawn on that face with everything you had drawn; Esc takes you back as you were. (Right-clicking a face → Sketch on this face still works too.)

4.9.42

build 2026.10.22b · 22 Oct 2026

Clock designer

New

  • Clock designer (Generators): the face can be organic (soft cells that are always joined, with the same design number giving the same face, symmetry and more cells at the rim or the hub), honeycomb, grid, rings, spokes or plain; round, square, rounded, hexagon, octagon, toothed or the outline of your own sketch or text. Numbers (1–12, 12·3·6·9 or Roman, any font, on pads, a ring or joined into the pattern, raised or engraved), bars, dots or triangles and minute ticks. Hands in four styles with a counterweight, the movement's hole sizes (the minute hand's hole with flats), a second hand and a centre cap. A pocket in the back when the face is thicker than the shaft allows, a keyhole slot for hanging, a coloured back plate behind the cut-outs. Shown ready to print, put together or exploded, and checked: one piece, strut width for your nozzle, thickness at the shaft, bigger than your bed.
  • The Projects screen has a Makers row: the clock designer, the puzzle maker, the neon sign, QR code, business card and the rest, one click from the start (a new design with the maker open). The ones you used lately come first and new ones are marked; searching your projects finds makers too.

4.9.41

build 2026.10.22a · 22 Oct 2026

Layers, Puzzle maker and touch screens

New

  • Layers (Inspect, or right-click a part): a slider at the right of the view goes through the layers from the bed up, with the layer number and height, Play, first and last layer, your layer height, This layer only or From – to (drag the lower handle up to look inside), a faint view of what is still to come, and the cut face in the part's colour. Each layer is checked for areas that start in mid-air (they need support) and bits thinner than the nozzle (they won't print). It never changes your design.
  • Puzzle maker (Generators): Jigsaw from a flat plate (square, rounded, round or heart) or cut straight down through any part, with knob size, wavy edges, gap, engraved numbers underneath and a tray. Maze with exactly one way from start to finish (checked), long winding paths or many dead ends, and the route as a separate part. Packing tray: pieces that fill a tray, with an option for only one way to fill it, checked by trying every way. Cube: little-cube pieces that build a 3 × 3 × 3 or 4 × 4 × 4 cube, with how-to-build steps and every piece turned to print with nothing hanging in the air. The same design number always gives the same puzzle.
  • Touch screens (iPad, Android tablets): one finger on empty space turns the view, one finger on a part moves it, two fingers move the view and pinch to zoom, hold for the right-click menu (hold, then drag to select several), double tap to open. Handles are easier to grab with a finger. Tablets get bigger buttons and a roomier layout.
  • Pens (Apple Pencil and other styluses): the pen selects, moves, sketches and sculpts like a precise mouse; once you have used it, fingers only move the view, so your hand can't move parts by accident. In the sketcher a finger draws, two fingers move and zoom the paper.
  • Sketch on this face (right-click a face): the workplane goes onto the face and a sketch opens on it.

Improved

  • A new sketch starts on the plane you are looking at: front view → the front (XZ) plane, side view → the side (YZ) plane, otherwise the ground or the workplane. The plane list names the axes.
  • While sketching, the rest of the design stays in sight: other parts show as light grey shapes (even ones that don't touch the sketch plane) and your other sketches in purple, so you can draw against them.
  • Sweep keeps a profile the way you drew it: a profile drawn facing along the path is not turned or mirrored any more.
  • Renaming in the Design tree happens right in the list (double-click the name), and your own grid step and printer profile names are asked in the program's own window.
  • If cloud projects can't reach Google Drive, the message now says why.

Fixed

  • After Ctrl+D on several parts, dragging moved only the original under the pointer: now all the copies move together.
  • Rename boxes could show up as a false "froze" report.

4.9.40

build 2026.10.21k · 21 Oct 2026

Neon signs, smiley moods and finer threads

New

  • Neon sign (in Generators): your text with a groove for LED neon strip running round each letter. Set the strip width, wall, depth, plate thickness and margin; the plate follows the words or is a rounded rectangle, with a wire hole and two keyhole slots in the back.
  • The smiley shape has a Mood slider, from a big smile through a straight face to sad, and a Tongue option.
  • Threads: set the thread height (how deep it is), the crest width and the root width.
  • SVG import: Wall can go outside the shape, inside it, or centred on the line.

Improved

  • Cylinders, cones and tubes are smooth for their size automatically, so big round parts no longer look faceted (and stay smooth after grouping). You can still set a number of sides.

Fixed

  • Copying several parts with Ctrl+D and then dragging moved only the part under the pointer: now all the copies move together.
  • Cloud projects on the website could not reach Google Drive after signing in: fixed.

4.9.39

build 2026.10.21j · 21 Oct 2026

SVG & Text: raise, engrave, cut through or wrap

New

  • SVG & Text tool: put text or an SVG on its own as a solid, flat on a face of a part, round a cylinder you size, or round any part (click the spot), as Raised, Engraved or Cut through. Holes inside letters and shapes are kept; engraving and cutting are real cuts, done with the normal Group so the pieces can still be taken apart.
  • Its controls: text, font, style, alignment, letter and line spacing and bolder/thinner for text; Edit the drawing for SVGs; width and height (with Keep proportions and Original size), depth, rotation; diameter, cylinder height, height on the cylinder, start angle, hollow tube with wall; turn round and move up/down on a part; mirrored for roller stamps; gap from the surface; keep the original; join or cut in on Apply.
  • Too wide to fit round? It shows the sizes and offers Shrink to fit, Bigger cylinder or Let it overlap. Cutting through tells you how thick the wall is.

Improved

  • A live preview shows the result in the view before you apply it, and Undo takes it back in one step at a time.

Fixed

  • Adding a connector (Split → Connect) could close the tool straight after, saying the part was gone: fixed.

4.9.38

build 2026.10.21i · 21 Oct 2026

SVG & Text Wrap: its own simple tool

New

  • SVG & Text Wrap is its own tool (Wrap, in the Create group) with three plain steps: your design (add text, import an SVG or click a flat part), what to wrap it around (a cylinder of any size, or click the spot on any part) and the style (raised or engraved). A live preview shows the result before you press Wrap it.

Improved

  • Flat parts show a "Wrap around a cylinder or part…" button in their panel that opens the tool.
  • The suggested cylinder size always fits the design once round (it no longer says it is too small at the size it suggested).

4.9.37

build 2026.10.21h · 21 Oct 2026

Wrap any flat design around a cylinder or any part

New

  • Wrap around a cylinder or part (in the panel of any flat part: SVGs, sketches, text): left to right goes round at its true length along the surface and the back edge becomes the top.
  • Around a cylinder: choose the diameter or press "Fit once round"; a matching cylinder can be added in place. It warns when the design is too wide to fit round.
  • Around a part in your design: click the spot where the middle of the design should go and it follows the surface all the way round, over flat sides and corners (a box), curves (a vase, a bottle) and domes (a ball).
  • Raise it from the surface, or tick Engrave to sink it in (made as a hole). "Join them now" / "Engrave it now" makes it one part.

4.9.36

build 2026.10.21g · 21 Oct 2026

Cloud projects live in your own Google Drive

Improved

  • Cloud projects are kept in your own Google Drive, in a "SimpCAD X Projects" folder (normal .scx files, with pictures Drive can show). SimpCAD X can only see the files it makes there. Deleting a project puts its Drive copy in Drive's bin, so it can still be brought back.
  • Signing out tells Google to forget the sign-in; your projects stay on your computer and in your Drive.

4.9.35

build 2026.10.21f · 21 Oct 2026

Cloud projects with Google sign-in, font previews, grid fix

New

  • Cloud projects: sign in with Google (Projects, or Settings → Saving) and your projects open on every computer and browser where you sign in. Changes go both ways by themselves; if the same project was changed on two computers, both versions are kept.
  • Font list with previews: each font shows your own text written in it, with search. In the part panel and in the sketch.
  • What's New shows each time the program starts, with "Don't show again" at the bottom right. Settings → What's new turns it back on.

Improved

  • Performance mode has a small switch that is always on the top bar.
  • Infill patterns (honeycomb, grid, circles, stars…) in the sketch no longer need Beta tools switched on.
  • Make bendable's preview uses light blues, purples, reds and oranges, mixed differently every time you preview.

Fixed

  • A part with an odd size (like 20 × 21 mm) turned 90° no longer lands off the grid when you move it: its edges snap to the grid again.

4.9.34

build 2026.10.21e · 21 Oct 2026

Text wraps round cylinders, fillet guidance, What's New tours

New

  • Text and sketches dropped on the round side of a cylinder wrap round it at their true length. The text stays editable; "Unwrap" in the panel (or "Keep it flat" right after dropping) puts it back flat.
  • Fillet: a green / amber / red estimate of how heavy the rounding is, updated as you pick edges, and tips for detailed parts (the ⓘ button shows them any time).
  • What's New: after an update, a short window shows the main changes, with a Take a Tour button that points to each one. Settings → What's new keeps every version.
  • Contact us (bottom left) opens an email to [email protected].

Improved

  • Make bendable has a fresh look: rings, hinge spots and the preview use the SimpCAD X blue, red and purple, with new icons for each hinge type.
  • Fillet opens straight away on very detailed parts: the edges are found in the background while the window keeps answering.
  • Performance mode is in the Settings quick switches and in All settings → Performance again.
  • Placing text no longer offers to turn the face into a workplane.
  • Export with extra curve detail shows its progress part by part and skips parts that are already very detailed, so it no longer looks stuck.

Fixed

  • STEP export of very big designs (over a thousand parts) stopped with an error: fixed.
  • Fillet on a very detailed part could freeze the program for a long time before the panel opened: fixed.
  • A rare error in the web version when a browser add-on closed a window is no longer reported as a crash.

4.9.33

build 2026.10.21d · 21 Oct 2026

Make bendable rebuilt, smooth all-over rounding, green selection

New

  • Make bendable, rebuilt: the cuts are drawn on the part — drag a ring to turn a cut, drag a line to move it, double-click to add one, click one and press Delete to remove it. Choose how many (or Max), draw your own cuts, or draw a path along a curved band. Six hinge types: Pin (strongest), Cones, T-pin, Ball (bends every way), Knuckle (door hinge) and Living (one piece, for PETG/TPU). Preview shows the real slices in blue and orange, and Cut open shows the hinges inside.

Improved

  • Rounding every edge (or every top / bottom / upright edge) of a flat part pulled up from a sketch — a honeycomb panel, a plate with holes, a star — is now done in one smooth go: where three walls meet it blends cleanly, thin walls get the biggest rounding they can hold (full height, flat strip on top) and it always comes out as one sound solid.
  • Selected parts are outlined in green.
  • The toolbar's hidden tools are easy to find: each group ends with a clear "⋯ 4 more" button, and a group that has no room folds into More whole.

4.9.32

build 2026.10.21c · 21 Oct 2026

Designs save themselves, History is kept, safer fillets

New

  • Your design saves itself into Projects as you work: going to Projects, starting a new design, opening another one or closing the window never loses anything (no more "save first?" questions). A little "✓ Saved" shows next to the design's name.
  • History is saved with the project: open it again tomorrow and History (and undo) still has your steps.
  • Settings → Saving: turn automatic saving on or off, choose how often (as you work, or every 1, 2, 5, 10 or 15 minutes), and whether History is kept with the project.
  • Renaming the design (the name at the top) renames its project too.

Improved

  • Fillet on thin walls (a honeycomb panel, a thin rib): when the size you ask for cannot fit, each edge gets the biggest rounding that does — a thin wall becomes a full round — and you are told how many edges that was. Every other edge keeps your size.
  • Export menu is easier to read: STL, 3MF, OBJ and STEP come first, one line each with Everything and Selection buttons, and curve detail is a simple choice.
  • Typing in a text part with a backing plate no longer lags: the plate is rebuilt when you pause.
  • The shapes panel on the right always opens when the program starts.
  • Tidier toolbar: the "more tools" arrows no longer push the group names off the bottom of the bar, and tool names have a little more room.

Fixed

  • Fillet with every sharp edge picked on a honeycomb panel shot a long beam out of the part and swelled the walls into the holes: fixed.

4.9.31

build 2026.10.21b · 21 Oct 2026

Fillet overhaul, pipes, bendable parts, big sketch and texture upgrades

New

  • Pipe maker (Assemble): draw a pipe network from above — straights, smooth bends, arcs, T and cross junctions — pick round, square or hex profile, hollow with your wall, ball corners, flanges or fittings, and get one watertight part. Ready-made starts: elbow, tee, frame, S-bend.
  • Make bendable (Modify): slice any part — an imported model too — into segments joined by print-in-place ball joints or a flexible strap, so it prints flat, already assembled, and bends like a flexi animal.
  • Outline tool: new Silhouette mode — the solid filled shadow of the part, with 'bridge gaps' to close inlets and a choice to fill the holes. Good for display stands, inlays and sticker-style backing plates.
  • Nine new generators: tray with dividers, stacking box with lid, vase, jar with screw lid, phone stand, easel stand, picture frame with print pocket, clock face, duct adapter.
  • Keychain maker: Flush inlay style — two-colour text sitting level with the top, with a pause-at-layer note for colour swaps.
  • Wrap a pattern round a cylinder: an SVG or text truly wraps round the side (not a flat press-in), meeting itself cleanly all the way round.
  • Rulers and guides in the sketch area: drag a guide out of a ruler, drawing snaps to it, drag it back to remove it. Guides save with the sketch.
  • Character panel for sketch text: size, letter spacing, line spacing, curve (bend) and alignment, like a proper layout tool.
  • Sketch tools now show their names, not just icons.
  • Join the SimpCADX community: a link at the bottom corner takes you to the group.

Improved

  • Fillet got a big overhaul: clicking a curved surface now rounds its rims (an arch roof, a bent part) instead of scalloping the surface; a second size at the other end gives a tapered rounding; and corners where two rounded edges meet round a notch (a star's points, the inside of an L) are swept cleanly instead of leaving a spike.
  • Logo tool: free placement — click anywhere on the part, drag the ghost, place several in one go, and it wraps round curved sides.
  • Model Repair: checks several parts at once, draws the problems on the model (red: gaps, orange: doubled edges) with a Show button and a zoom, counts zero-size and doubled faces, and the report says honestly what was fixed and what remains.
  • Surface texture: every pattern now comes out watertight on every shape — textures ease out before sharp edges like machined knurling — and Auto mapping truly wraps round parts seamlessly instead of smearing a flat projection.
  • Tidier toolbars: each group shows its everyday tools and tucks the rest behind a 'More' arrow; Customize toolbar has a switch to show every tool all the time.

Fixed

  • Pipe maker: V-angle bends could leave a broken solid; a corner drawn tighter than the pipe is fat now stays a clean sharp corner instead of folding in on itself.
  • Make bendable: on parts with several joints in a row, a stem could reach back into its own segment's socket and bind the joint.

4.9.30

build 2026.10.21a · 21 Oct 2026

Hole shapes and countersinks, cleaner hollows

New

  • Hole pattern: pick the hole shape (round, square, hexagon for nut traps, slot, star, or your own SVG) and add a countersink or counterbore for screw heads.

Fixed

  • Hollow with an open top on a dome or a pointed part (a paraboloid, a cone, a tapered dome) came out as a jagged mess. It now hollows cleanly and the opening goes through the tip.
  • Hollow on curved parts (a torus, an L-shape with sharp inner edges) is now always one fully closed solid.

4.9.29

build 2026.10.20a · 20 Oct 2026

Better sketching, bend presets, bearing maker

New

  • Sketch on the front, the side or any face: pick "On" at the bottom of a new sketch, or move the workplane onto a face first (W). The part stands on that plane when you press Done, and stays there when you edit it.
  • See your other parts in the sketcher: their outlines show in grey so you can draw against them (Show parts).
  • Exact sizes while drawing: start a line, rectangle, circle or arc and type the number (Tab for the next), then Enter.
  • Trim (X), Join, Close gaps and To lines: cut away the pieces you don't want, join end points, close small gaps. A badge says when the outline is closed or shows where it is open.
  • 3-point arc: start, end, then a point it passes through.
  • Spline points: Corner, Smooth, Symmetric or Separate handles, and Shift+click to pick several points at once.
  • Offset… in the sketcher: in or out, corner style, miter limit, several copies, rings, keep the original, with a live preview.
  • Bend panel: shape along the height, length or width, quick bends (Arch, Bowl, U-turn, 90° corner, Hook, Gentle curve, Ring), bend from the middle, direction buttons and a live side view. Flat parts like strips and ladder rails bend along their length.
  • Bearing maker (Bearings & Motion): a working bearing that prints in one go, already assembled, sized for your printer.
  • Logos wrap round round sides: cylinders, cones, mugs, pens.
  • Scan clean-up: loose bits off, holes closed, noise smoothed, a flat base and fewer triangles, in one go.
  • Paste an SVG, an STL or a picture straight in with Ctrl+V.
  • New window (Ctrl+Shift+N): another design side by side, each with its own autosave.
  • Printer profiles (Settings): save printer, material, nozzle, layer height, clearance and bed size under a name and switch in one click.
  • Number my exports (Settings): Bracket (01).stl, Bracket (02).stl…
  • Traditional Chinese (beta).
  • Text backing plate shapes: a sticker edge that follows the letters (new default), a smooth blob, a rounded rectangle or a rectangle.

Improved

  • SVGs drawn only as thin outlines (cutting files, CAD exports) now come in as filled shapes, with inner outlines as holes.
  • Import and Export always stay on the toolbar, and the tools you use most come first (the least used fold away first on a small window). Smaller windows fit better.
  • Most used fonts at the top of every font list.
  • Fine nudges in the sketcher: Alt + arrows 0.1 mm, Ctrl + arrows 0.01 mm.
  • New text in the sketcher stays solid: infill patterns only when you pick one.
  • Parts that are off the grid after turning snap back onto it when you move them.
  • Loft between sections drawn the other way round no longer twists. Hollow on lofts and vases is smooth, light and even.
  • Grouping hundreds of touching parts (multi-colour SVGs) is much faster.
  • Simplify on very big scans works in steps and finishes much sooner.
  • Web fonts are traced at a higher resolution, so letters come out smoother.
  • Errors say what didn't work, that your design is unchanged, and what to try.

Fixed

  • Round all edges on cylinders, cones and spheres could hang the program.
  • Double-clicking a sketch inside a group in the Design tree didn't open it.
  • Hollow on a part that got too small for its walls could show an error; it now says which wall size fits.
  • Open-top trays with thick walls were refused.
  • The drop test on very detailed parts could stop with an error.
  • Reopening Lasso cut could show an error.
  • A picture that can't be read now gives a clear message.
  • Trimming where a line crossed an arc twice left the arc in one piece.

4.9.28

build 2026.10.19a · 19 Oct 2026

SVG as a part, bend from a point, faster fillets

New

  • Import an SVG straight in as a part: filled as drawn, silhouette (outer shape, no holes), outer line, inner lines or all lines, with your height and line width. It stays editable: double-click it to change the lines.
  • Bend from a point: choose where on a part the bend starts and ends (Pick on part, or Bend starts / ends), and a bend radius. Below stays straight, above carries on straight: bars into arches, U shapes and ladder rails.
  • Save folder (Settings): one folder for projects and every Save As and export, for example a network drive or a synced folder. If it can't be reached, work is saved in Documents until it's back.
  • Customize toolbar: untick the tools you rarely use (or right-click a tool › Hide). They stay in More ▾ › Your hidden tools.
  • Cost: 42 currencies, including the Philippine peso.
  • New languages (beta): 简体中文, 日本語, 한국어, हिन्दी, Bahasa Indonesia, Tiếng Việt, ไทย, Türkçe. Buttons, menus and panels are translated; some longer help is still in English.

Improved

  • Round / chamfer on curved parts (domes, spheres, grooves) is many times faster and comes out smooth and closed.
  • Opening a design with rounded edges no longer holds the window while they are rebuilt.
  • Lay flat is quicker on very big scans.
  • Smaller screens start with the tidy drop-down tool menus.
  • Importing an SVG with lots of colours no longer makes hundreds of parts unless you ask for it.

Fixed

  • The part panel's last section (Position & rotation) can always be scrolled into view and opened above the bottom bar.
  • Dragging a part while a mesh tool is open could show an error.
  • A click that arrived while the program was busy could show an error.
  • Hollow on L-shaped parts gives a cleaner solid.

4.9.27

build 2026.10.17d · 17 Oct 2026

Hollow body, curved edges and tidier toolbar

New

  • Hollow body: even walls on any shape (imported STLs too), with any sides left open (top, bottom, front, back, left, right), rounded or sharp inner edges, and drain holes for resin prints.
  • Round and chamfer curved edges too: where a cylinder meets a cone, the rim of a round part, any curved seam.
  • Tools as drop-down menus (Settings › Quick switches) for a tidier toolbar.

Improved

  • Round / chamfer: pick top, bottom or vertical edges in one click, set the sharp-edge angle, only visible edges, smooth runs of edges with one click, rounding that can grow with the part, and preview quality.
  • Save ▾ next to Save: Save as… lets you pick the name and folder.
  • Web version: when an update is ready it tells you, with a Reload button.
  • Web version: your work is kept more reliably when you close or switch tabs, and it warns you if the browser runs out of room.
  • Grouping parts that sit on the same level gives a cleaner, lighter result.
  • Opening a design saved in an older version no longer rebuilds all its groups.

Fixed

  • Hollow with an open top now really opens the top.

4.9.26

build 2026.10.17c · 17 Oct 2026

Twist & bend, Gridfinity and more

New

  • New: Outline for any part, imported STL and 3MF files too – a raised rim around it (cookie cutter, tray edge), a plate under it, or an outline line, with your width, gap and height.
  • New: a business card maker (Generators). Type your details, pick a size and layout, add a QR code, border, pattern or key-ring hole, drag things where you want, then Create card – raised, flush or engraved.
  • Gridfinity bins (with compartments and a stacking lip) and baseplates, on the standard 42 mm grid.
  • Reference points: snap targets on a part's corners, edge middles or centre that never print.
  • Textures: use your own picture as a texture – light parts stay on the surface, dark parts go deep.
  • New printer: Anycubic Kobra X.

Improved

  • Sculpt is out of beta, with 12 brushes: new Clay, Layer, Crease, Scrape, Fill and Nudge. Plus falloff shape, mirror across the part's X/Y/Z, only the side facing you, pen pressure, steady stroke and number keys for brushes.
  • Every part's panel now has Taper and Twist, lean & bend: taper the top, twist, lean or bend any shape, text, imported model or group. Reset puts it back.
  • Save as default: new shapes of that kind start with your size, settings and colour (Reset defaults goes back).
  • Cut to fit: drag each cut's handle in the view to slide it, with sliders next to the position and tilt boxes.
  • After a lasso cut, press Add connectors… to put pins, plugs, dowels, magnet pockets or a screw thread across the cut, just like Split. Works on curved cuts too.
  • Grid: 2.54 mm pin pitch and your own step (offered whole, halved and quartered). Hide the workplane from the quick settings.
  • Screw holes: counterbore, countersunk both sides or plain. Threads: inch (UNC/UNF), Whitworth and BSP pipe sizes. Capsule: one end can be smaller.
  • Physics opens and updates faster on big designs.
  • Learn (top bar): a New in this version list, a search box, more tools explained, and Open this tool on each page.

Fixed

  • Fixed: the colour picker could stop with an error on a part inside a group.
  • Flipping a spline in a sketch no longer stops with an error.

4.9.25

build 2026.10.17a · 17 Oct 2026

Spline handles and a better Cruise

Improved

  • Spline points now have handles: in Edit nodes, drag the square handles to bend the curve (hold Alt to move one side only). While drawing, drag instead of clicking to pull out a bend.
  • Sharp corners: click a point twice while drawing, or double-click a point in Edit nodes. Corners no longer need a second point on top.
  • Cruise: hold C while you drag a part and it now glides onto the sides and slopes of other parts too, not just their tops, turning to sit flat on each face. Let go of C to keep it there.

4.9.24

build 2026.10.16e · 16 Oct 2026

Better problem reports

Improved

  • If opening a file is ever slow, the problem report now says exactly which step it was, so it can be sped up.
  • Fewer false alarms: closing or reloading the web version’s tab, or a design too big to combine, is no longer reported as a problem.

4.9.23

build 2026.10.16d · 16 Oct 2026

Arrow keys fixed

Fixed

  • The left and right arrow keys moved the selected part the wrong way. They now move it left and right as you see it on screen, from any angle.

4.9.22

build 2026.10.16c · 16 Oct 2026

Faster start-up and your printer’s build volume

New

  • Printer build volume: a light outline of how much your printer can print (Settings › Quick switches). It turns orange when a part sticks out of it.

Improved

  • Opening the program with big designs from last time no longer freezes the window: big parts get ready in the background, and only once.
  • Detailed parts with lots of edge lines draw faster while you turn the view.
  • The shape pictures in the library no longer hold up the start.

Fixed

  • A freeze of several seconds just after start-up when big imported parts were open.

4.9.21

build 2026.10.16b · 16 Oct 2026

Rounded text, screenshots in chat and safer saving

New

  • Text can have rounded or chamfered top edges (0–5 mm), on plain text and on raised letters on a plate.
  • Send screenshots with feedback and in the chat: a picture of the 3D view, an image file, or paste one with Ctrl+V (up to 3).
  • The Feedback button shows how many replies you have not read yet, and the chat with the developer is one click away inside it.
  • An Updates button next to Settings turns green when a new version is ready.
  • More printers, grouped by maker: Snapmaker U1, J1 and Artisan, Bambu Lab A2L, Prusa Core One L, Creality K2 Pro, Anycubic Kobra S1, Sovol SV08, Flashforge AD5X, Voron, UltiMaker and more (58 in all).

Improved

  • Opening big 3MF files (like ones saved from slicers) is about 4 times faster, and the window no longer freezes while it reads them.
  • Very big designs with groups inside groups now save much smaller files.

Fixed

  • Saving a very big design could fail with “Invalid string length”. It now saves, and if a design is ever too big for one file, you are told clearly, nothing is lost, and you can export it as a 3MF.
  • The Support window no longer jumps up and down.
  • Undo after using Split no longer causes an error.
  • A rare error when a press was lost while sculpting or moving a part.

4.9.20

build 2026.10.15h · 16 Oct 2026

Lasso cut, technical drawings and a smarter Flexi

New

  • Lasso cut: draw a loop round the bit you want to cut off – an arm at its shoulder, a head at the collar – and it comes away along your line, so the join hides in a natural seam. Only the piece you drew round is cut, never what is behind it.
  • Technical drawing (Export → Technical drawing): a PDF with front, top and side views, the overall sizes marked, a title block and a picture of your design.
  • Hole pattern: click a face and get a grid or a ring of holes (bolt circle) cut straight into it.
  • Simplify (right-click a part): makes big scans and downloads much lighter – far fewer triangles, same shape.
  • Search everything with Ctrl+K (or the Search button): type “fillet”, “hex nut” or “export 3mf” and press Enter.
  • Find a part by name at the top of the design tree.
  • New shapes: Bolt + nut set (prints and screws together) and Bent pipe (tube or solid rod, any bend).
  • Pattern → Spiral: copies go round and up, like a spiral staircase.
  • Picture of the view (Export → PNG), and Back up all designs to one file (Projects → Backup), with Restore.
  • Align and Mirror are big labelled buttons next to Group.
  • More printers: Bambu Lab X1E, P2S and H2D Pro, Prusa XL and MK3S+, Creality K1 Max, K2 Plus and Ender 3 V3, Elegoo Centauri Carbon and Neptune 4 Max, Anycubic Kobra 3, Qidi, Sovol and Flashforge.
  • A short three-step tour the very first time the program is opened.
  • Web version: works on phones and tablets, can be installed as an app that opens offline, and can hand a design over to the Windows app.
  • SimpCAD X is in the Microsoft Store: installs and updates itself, no Windows warnings.

Improved

  • Flexi from your own shape (SVG or part): it now cuts at the natural joints – neck, hips, tail – and only across the body, so legs and heads stay whole and swing.
  • Keychain Outline shape: the border now runs smoothly round the name instead of bumping over every letter.
  • Big models: Model Repair is about 18 times faster on a 2.5-million-triangle scan, placing a shape on a big scan no longer pauses, and autosave no longer stalls the window on big designs.
  • A very large design (2 million triangles or more) now says so once and offers Performance mode.

Fixed

  • Shell: pressing Shell closes the box straight away and shows the progress, so it can no longer be started several times by clicking again. Every dialog now locks its buttons while it works.
  • If your graphics card or phone resets the 3D view, it comes back by itself instead of staying blank (your design is saved first).
  • Leaving the program open while the computer sleeps is no longer reported as a freeze.

4.9.19

build 2026.10.15g · 15 Oct 2026

Full detail by default

Changed

  • Distance detail (drawing far-away and small parts lighter) is now off unless you choose it. It lives under Settings → Performance and is always on in Performance mode.

4.9.18

build 2026.10.15f · 15 Oct 2026

More room to work, and a Stop button

New

  • More room: close the design tree and the shapes panel with their ‹ › buttons (tabs on the edges bring them back), fold the object panel away, or drag it anywhere by its grip. The new “More room” button (or the \ key) does it all at once.
  • Long jobs show how long they have been running and a Stop button. If something seems stuck, press Stop: the job is cancelled and your design stays as it was.
  • When a job takes a long time, the Console opens by itself to say what is going on.
  • Box: Taper, twist & lean. Tick it in the Box panel to shrink or grow the top, twist the box as it rises, or lean the top over – handy for stands, vases and tapered feet.

Fixed

  • Rounding edges (Fillet) could stop with an error while moving the mouse over some parts.
  • The web version starts properly when opened as simpcadx.com/app.
  • Crash reports: closing the program normally is no longer reported as a crash, and reports say more about what was going on, so problems get fixed faster.

4.9.17

build 2026.10.15e · 15 Oct 2026

Fewer antivirus false alarms, a history timeline and a web version

Fixed

  • Some antivirus programs wrongly flagged SimpCAD X as a trojan. The program no longer does the things that set them off: no hidden scripts, and its window component now loads the normal Windows way (it ships as WebView2Loader.dll next to the program). The program also carries its name, maker and version in Properties → Details.
  • Shortcuts are only added when you say so: a one-time question offers to put SimpCAD X in your Start menu and on your desktop.
  • Big models: export is several times faster and the window no longer freezes while the file is written. 3MF files are compressed, so they are much smaller.
  • Combining huge models that have gaps in their surface now shows a clear message instead of running out of memory.

New

  • History timeline at the bottom of the 3D view: every step you take is a small icon. Hover to see what it did and when; click to go straight back to that point (and forward again).
  • Try it in your browser: the free web version on simpcadx.com, nothing to install. Designs are saved in the browser on that computer.
  • Better crash reports: freezes and hangs are reported too, with the last steps before it happened.

4.9.16

build 2026.10.15d · 15 Oct 2026

Export crash fixed

Fixed

  • Exporting no longer closes the program: the Save window itself was crashing the moment it opened. If the Save window ever has a problem again, the file is still saved (to Downloads) and the program keeps running.

4.9.15

build 2026.10.15c · 15 Oct 2026

Export fix

Fixed

  • Better crash reports: freezes and hangs are now reported too (also when the program had to be closed), with the last few steps before it happened, so problems can be found and fixed much faster.
  • STL export with Perfect Fit switched on no longer freezes the program on big designs: the fit is now worked out part by part in the background.
  • Exporting an STL of a selection no longer crashes. Big exports now run on their own, so even if one runs out of memory the file is still saved and the program keeps working.

4.9.13

build 2026.10.15a · 15 Oct 2026

Griptok maker, a rebuilt Flexi and fast, reliable export

Fixed

  • Export no longer stalls or crashes on big designs: every part is checked on its own and only parts that really overlap are fused, so a design with hundreds of parts exports in seconds.
  • Print sends just the parts you have selected (or the whole design when nothing is selected).

New

  • Griptok maker (Generators → Griptok): the round top for a phone grip. Type a word or two and the letters bulge to fill the circle, or load a logo and it is split into a few colours. Every colour is its own part for multi-colour printers; one nozzle gets the pause height.
  • Flexi, rebuilt: clean V cuts, hidden pin joints that never pull apart, smoother pieces and much faster to update. Any solid 3D part can now become a Flexi and keeps its full shape.
  • Feedback asks for your name (optional) so replies can greet you properly.
  • Support on Ko-fi: the ♥ Support button now opens ko-fi.com/simpcadx.
  • Update checks, the anonymous user count and crash reports are on from the start (switch any of them off in Settings → Online).

4.9.12

build 2026.10.11c · 11 Oct 2026

Chat with the developer and crash reports

New

  • Chat with the developer: after you send feedback, replies arrive in a chat window inside the program and you can write back. While a chat is open, new replies show up within seconds.
  • Automatic crash reports (optional, Settings → Online): when something breaks, the error and where it happened are sent so it can be fixed. Never your designs, files or name. Reports wait and send later if you are offline.
  • If the program part of SimpCAD X crashes, it notes what happened and offers to report it the next time you open it.

4.9.11

build 2026.10.11b · 11 Oct 2026

Languages, a bigger keychain maker, your own Flexi and replies to feedback

New

  • Languages: SimpCAD X now speaks German, French, Spanish, Italian, Dutch, Polish and Portuguese. On a non-English computer it asks at the first start; change it any time in Settings → Language (or the ⚙ menu).
  • Generators button in the toolbar (Create, next to Text): Keychain, QR code and Flexi in one click.
  • Your own Flexi: turn any shape into a wiggly print-in-place Flexi. Right-click a part (a sketch, an imported SVG logo, a photo outline, text…) and choose Make it a Flexi, or load an SVG file. Separate bits like letters are joined automatically, and your original part stays as it was.
  • Keychain maker, much bigger: a second line, curved, bolder or tilted text, 18 shapes and 14 icons, your own SVG or any part as the shape or icon, cut-through stencil letters, text on the back, rings at both ends or a strap slot, Flexi cuts, three colours, S/M/L/XL sizes, Surprise me, and Make a set (one keychain per name).
  • Replies to feedback: when you send feedback and the developer answers, the reply shows up right here in the program.

Fixed

  • Sculpt mirror now mirrors left ↔ right as you see the part, through its middle, instead of landing in the wrong place.
  • Usage stats (if you switched them on) are counted even when the program is left open for days, and tool tallies gathered after the first start of the day are no longer lost.

4.9.10

build 2026.10.11a · 11 Oct 2026

Generators: keychains, QR codes and Flexi critters

New

  • Generators (new section in the shape library): ready-made parts with their own live panel. Pick one and it is on the workplane in a click.
  • Keychain generator: type a name, pick a shape (outline, rounded, pill, circle, tag, heart, shield, bone, star), add an icon, raised or engraved letters, a raised border and a key ring outside, inside, on top or in a corner. Drag a corner and the letters scale instead of stretching.
  • QR code generator: a link, Wi-Fi login or text as a printable QR plaque or keychain, with a label underneath. It shows how big each square is so you know it will print and scan.
  • Two colours in one click for keychains and QR codes: the base and the letters (or code) become separate parts for a multi-colour printer (export 3MF), or pause at the base height on one nozzle.
  • NFC tag pocket for keychains and QR codes: a hidden pocket for a 12–30 mm NFC sticker, sealed inside. It tells you the height to pause at to drop the tag in.
  • Flexi generator (beta): wiggly print-in-place critters (fish, snake, caterpillar, lizard or your name). Prints flat with no supports and comes off the bed already moving.
  • Projects → Keyring now starts with the Keychain generator.

Fixed

  • Typing in a panel box and then clicking the next box no longer loses the click.

4.9.9

build 2026.10.10c · 10 Oct 2026

Strength x-ray and Photo to part

New

  • Strength x-ray (beta, Strength button): click where a part is held and where it is pushed, set the force, and it shows where the part would snap from blue (fine) to red. It knows 3D prints are weakest between layers, says roughly what force breaks it and whether the layers or the plastic give way first.
  • It compares the three ways up you could print a part and turns it the strongest way up in one click: often about twice as strong for free.
  • Photo to part (Photo button): photograph a part next to any bank card and get its outline, holes included, at its exact real size. The card corrects the scale and a tilted camera. It opens in the sketch editor ready to extrude. No card? Type one real measurement instead.
  • Edit mesh: proper grids of squares (boxes, cylinder sides, most shapes), added automatically when a part has only a few big faces.
  • Edit mesh: a Mesh detail slider at the top makes the squares bigger or smaller, live, as one undo step.
  • Edit mesh: drag handles on the selection. Red / green / blue arrows move along X / Y / Z, the orange arrow pushes or pulls the selected faces (Shift+drag to extrude), the centre square moves freely. Plus Move by X / Y / Z boxes for exact moves.

Fixed

  • Pro mode: menus (Settings, right-click) lost their text. Fixed.

4.9.8

build 2026.10.10b · 10 Oct 2026

Perfect Fit: holes the right size, first time

New

  • Perfect Fit (Fit button): print one small test card with 5 holes and a peg, click the hole the peg fits snugly (or type caliper readings), and every export and the Print button correct hole and outside sizes for your printer. Holes and pegs fit first time.
  • It remembers separate numbers for each printer you pick in the bottom bar. Only side walls move, by a fraction of a millimetre; heights stay exactly as designed.

Better

  • Edit mesh and Perfect Fit windows: no stray text under some sections.

4.9.7

build 2026.10.10a · 10 Oct 2026

Pro mode: full mesh editing

New

  • Pro mode (Simple / Advanced / Pro at the top) with a Pro CAD tab. Simple and Advanced stay exactly as they were.
  • Edit mesh (Tab in Pro mode): edit the points and faces of any part, and it stays a closed, printable solid after every step. Click, drag a box, double-click a flat area, Alt+click an edge loop or paint to select.
  • Make circle (Shift+Alt+S): the outline of your selection becomes a perfect circle. Then Extrude (E) it into a tube or push it in for a hole.
  • Move, rotate and scale with G / R / S: lock an axis with X / Y / Z, type an exact number, Ctrl snaps. Soft editing pulls nearby points along smoothly.
  • Inset, Bevel (chamfer or round, with segments), Delete & fill, Fill holes, Flatten and Merge.
  • Even grid: rebuilds a part as a fine, even mesh to edit, with sharp edges kept sharp.
  • Loop cut (Ctrl+R), Knife (K), Subdivide and Smooth subdivision (Sub-D) with "keep sharp edges".
  • Learn SimpCAD X has a Pro CAD section for all of it.

Better

  • Anything that would tear the surface is refused with a message instead of breaking the part.

4.9.6

build 2026.10.09e · 9 Oct 2026

Rotate arrows stay on top, drop sounds, Learn updated

New

  • A soft thud when parts land on the bed: placing a shape, Drop to workplane (D) and Lay flat. On by default; turn sounds off or change the volume in Settings › Sounds.
  • Learn SimpCAD X covers all the new tools with animations: Print, Printer picker, Lay flat, Infill patterns, Separate into pieces, Move arrows, Performance mode, and the beta Sculpt, Surface and Repair.

Better

  • Rotate arrows always sit at the part's current top, even after you flip or tip it over, and spinning turns it around the way that is up now.
  • Learn: fixed a stray word at the bottom of some tool pages.

4.9.5

build 2026.10.09d · 9 Oct 2026

Click sounds on by default

Better

  • Rotate click sounds are now on to start with. Turn them off or change the volume in Settings › Sounds while rotating (or Quick switches › Click sounds).

4.9.4

build 2026.10.09c · 9 Oct 2026

Separate into pieces, firmer rotate snapping, click sounds, live infill preview

New

  • Separate into pieces: select a part made of loose pieces (a brick wall, letters, an STL with many bodies) and press Ungroup, or right-click → Separate into pieces. Every piece becomes its own part you can move, colour or delete.
  • Infill patterns show a live preview on your shape while you change the pattern, hole size, wall or angle. Press Fill when it looks right.
  • Click sounds: light tactile clicks while you rotate and a rounder tone on 45°, 90° and other key angles. Turn them off or change the volume in Settings (with a Test button), or with Quick switches.

Better

  • Rotate snapping is firmer: the inner ring holds each step until you are well past it, and it is harder to slip onto the outer ring by accident.
  • The outer rotate ring is smooth but sticks at the key angles (15°, 22.5°, 30°, 45°, 60°, 90°…) and turns green with LOCKED. Hold Ctrl for completely free turning.
  • The rotate dial labels its rings SNAP and SMOOTH, and shows the key angles as dots.
  • The Print button now shows a 3D printer.

4.9.3

build 2026.10.09b · 9 Oct 2026

Print button, infill patterns, lay flat, round & chamfer faces

New

  • Print button (green, top right): your design opens straight in your slicer, as a 3MF with colours. The first time it asks which slicer; change it any time in Export or Settings.
  • Lay flat (toolbar, and Export menu): every part (or the selected ones) turns onto its best flat face and is spaced out neatly on your print bed. One undo step.
  • Infill patterns for sketches (beta): Honeycomb, Triangles, Grid, Diamond, Circles, Stars, Slots, Waves, Organic (with Shuffle), 3D cubes, Octagons, Crosses, Hearts, Chevrons, Bricks and Your text. Choose the hole size, wall, border and angle, and round the corners for softer walls. Thin bits at the edge are left out so they print cleanly.
  • Round & chamfer: click a flat face and every edge around it is rounded or chamfered, curved edges and holes included. Single edges still work too.
  • 5-minute challenge: make your own name keychain, step by step, with “Show me” for every step. Great as a first design for kids and grown-ups (Learn, or the welcome message).
  • Printer picker in the bottom bar: choose your printer and the workplane becomes its bed.
  • Beta tools ON/OFF button next to Performance mode.
  • Move arrows: a Snap / Free switch under the Move arrows button (or hold Ctrl while dragging) for smooth, exact moves.

Better

  • Joining and cutting is more exact where a round hole meets a flat one (the new engine is used instead of falling back).
  • Messages no longer cover the Apply button of tool panels at the bottom.

4.9.2

build 2026.10.09a · 9 Oct 2026

Distance detail, clearer messages, easier saving

New

  • Distance detail (like distant scenery in games): detailed parts — text, scans, big or multicolour groups — are drawn from lighter copies when they are small on screen or away from where you are looking. Busy projects lighten harder. Selected parts, measuring, saving and exporting always use full detail. The lighter copies are made in the background and never while you drag.
  • Exports: the Save window opens in the folder you used last with a free name ready — “Plate (1).stl”, “Plate (2).stl” — so nothing is overwritten by accident. Afterwards the folder is shown with the file selected; if that folder is already open, the file is just selected there (turn this off in Settings).
  • Messages now appear as clear cards in the bottom-right corner, with what happened and where. A saved export has a Show in folder button. Hover a card to keep it up.
  • A small meter next to Performance mode shows how busy your computer is: processor, graphics card and memory, updated every 2 seconds.
  • The window title shows the version and the design name.

Better

  • Performance mode: the button now says Performance mode: ON / OFF, and the message explains what it does. It now also draws big and far-away parts lighter, so it helps on designs made of groups and imported parts too.

4.9.1

build 2026.10.08i · 8 Oct 2026

Much faster sculpting, Performance mode

Faster

  • Sculpt is much faster on detailed parts: each brush stroke now only updates the part of the surface it touches (instead of redrawing the whole part), the brush only looks at nearby points, and the result is stored once you pause. The 1–2 second freezes after each stroke are gone.

New

  • Performance mode (button next to Settings, top left): every part — the ones you have and new ones — is drawn at 75 % curve detail for a smoother program on big designs. The button shows which mode is on; click it again to put every part back to its own quality.
  • Under Quality you now see how many triangles the part has and its share of everything the screen draws (green / orange / red), so you know when lowering Quality will help.

Fixes

  • The panels for Sculpt, Model Repair, Freeform surface (height grid), Honeycomb and Trace image lost their layout in 4.8–4.9 (buttons in a row, sliders squashed): fixed.

4.9.0

build 2026.10.08h · 8 Oct 2026

Its own window, a new geometry engine, and lots more

New

  • SimpCAD X now opens in its own window (not an Edge window), with its own icon in the taskbar — right-click it and Pin to taskbar. While it is open there is a tray icon by the clock (Open, New design, Quit), and the first start adds SimpCAD X to the Start menu and the desktop.
  • New geometry engine (Manifold): joining, cutting and intersecting parts is exact and always gives a closed, printable solid — and is far faster on big parts (a 4-part group: 7 s instead of 2 minutes, with 7× fewer triangles). Parts it can’t handle (e.g. a broken STL) still use the old engine.
  • Start-up screen: shows your processor and memory (total and free), and the BETA tag.
  • Text: Style (Regular, Bold, Italic, Bold italic) with Slant and Bold amount, and Mirror for stamps and moulds.
  • Export → IGES for older CAD/CAM programs (every flat area a trimmed surface; use Sew / Knit in CAD to make a solid).
  • Settings → Lighter display for very detailed parts: scans, textures and big groups draw from a simplified copy when they are small on screen or while you drag (full detail when selected, and always for saving and export).

Beta tools (Settings → Beta tools)

  • Model Repair (Inspect → Repair): checks a part for gaps, doubled edges, tiny loose bits and inside-out surfaces and fixes them in one go — or rebuilds it as one solid.
  • Freeform Surface (Create → Surface): a smooth curved shape from a 5 × 5 grid of heights (dome, saddle, wave, ripple…), as an even-thickness panel or a solid with a flat base.
  • Honeycomb fill (sketch editor): select a shape and cut a hexagon pattern inside a solid border.
  • Trace image (sketch editor): turn a photo, logo or drawing into outlines, with a live preview.

Faster and tidier

  • Auto-save now happens in the background: saving a big design no longer freezes the window for a moment.
  • The toolbar groups have clear space between them (they close up again on small screens).
  • Ruler and Measure have their own icons.
  • Every release is now checked for speed before it ships (start-up, opening a heavy design, dragging, auto-save, memory).

4.8.0

build 2026.10.08g · 8 Oct 2026

Sculpt (beta), Bambu H2S and H2C

New

  • Sculpt (beta): shape any part by hand, like clay. Brushes: Draw, Inflate, Smooth, Flatten, Pinch and Grab, with size and strength sliders, mirror (X symmetry) and Add detail. Shift = smooth, Ctrl = the opposite direction, [ and ] = brush size, right-drag still turns the view. Every stroke is one undo step and the part stays a closed, printable solid. Turn on Settings → Beta tools, select a part, then Modify → Sculpt.
  • Printers: Bambu Lab H2S (340 × 320 × 340 mm) and H2C added. For the H2C and H2D the workplane now shows the strips only one nozzle can reach — “Left nozzle only area” and “Right nozzle only area” — just like the slicer, and the H2D plate is its full 350 mm width.

4.7.4

build 2026.10.08f · 8 Oct 2026

Clearer feedback errors

Fixes

  • Feedback: if a message can’t be sent, it now says why (no connection, or the server isn’t ready) instead of just “Could not send”, and offers an “Email it instead” button so your message isn’t lost.

4.7.3

build 2026.10.08e · 8 Oct 2026

Fixed: parts freezing when you start to drag

Fixes

  • Big fix for designs with detailed parts (textured faces, imported models, big groups): grabbing a part and dragging it straight away could freeze for a few seconds before it moved. Snapping now prepares its points once and samples very detailed parts, so drags start instantly.
  • Auto-save no longer runs in the middle of a drag, and saving a big design is much quicker (detailed parts are not re-encoded every time), so there are no more short stalls a moment after you let go.
  • Multi-colour groups draw faster.

4.7.2

build 2026.10.08d · 8 Oct 2026

Updates from inside the program, smoother dragging

New

  • Updates: SimpCAD X can now tell you when a new version is out and install it for you. Turn it on when asked, or in Settings → Updates (Check for new versions once a day / Check for updates now). Click Update now, then Restart now — your design is saved and comes straight back.
  • Every update is signed by the maker and checked before it is installed, so only genuine updates can go in. Nothing about you or your designs is sent when checking.

Faster

  • Dragging on slower graphics: if the picture can’t keep up while you move, turn or orbit, the view switches to a lighter look until you let go (no floor shadows or outlines round other parts), then snaps back to full quality.
  • If a drag is still slow, the Console (bottom right) notes the numbers (frame times, triangles, graphics card) — please include that line when you report lag.

4.7.1

build 2026.10.08c · 8 Oct 2026

Smoother dragging of big models

Faster

  • Dragging a big or detailed part (imported STLs, fine spheres, text) is now smooth: moving no longer recalculates every triangle on each mouse move, so the small stutters every few steps are gone.
  • Hovering and clicking parts right after moving them is instant, even on very large models.

4.7.0

build 2026.10.08b · 8 Oct 2026

New rotate tool, colour SVG parts, skew

New rotate tool

  • Two rings with two jobs: the inner ring snaps in your Rotate steps, the outer ring turns freely and smoothly (to 0.1°). The ring you are on lights up, and a chip next to the angle says SNAP or FREE.
  • Ghost trail: faint copies of the last two positions show while you turn, so you can see how far — and which way — the part has moved.
  • Hovering a rotate arrow shows a short hint of the path it will turn along; the full dial only appears while you rotate.
  • Keys: Ctrl = turn freely anywhere, Shift = 45° steps, Esc = cancel the turn and put it back, [ and ] = turn the selection one step (Shift: 45°).
  • Looking straight down, only the spin arrow shows; tilt the camera and the tilt arrows come back.

SVG and sketches

  • Import a multi-colour SVG and tick “Keep colours as separate parts”: Done makes one part per colour, in that colour, cut to fit together like the picture (great for multi-colour printing). White areas stay real parts instead of becoming holes.
  • Skew: Skew X / Y boxes in the sketch editor, or Ctrl+drag a side handle (Shift = 15° steps). Works on one shape or a whole imported drawing.

Fixes

  • Fillet: a big fillet on all four side edges of a thin plate now keeps its size (a 7 mm fillet on a 6 mm plate was shrinking to 3 mm).
  • Sketch: Convert to path no longer flips a mirrored shape twice.

4.6.9

build 2026.10.06f · 6 Oct 2026

Rotate: ring only while turning

Better

  • The turning dial now appears only while you’re actually rotating. Hovering a rotate arrow no longer pops up a ring; it just highlights the little arrow, so the selection stays clean and uncluttered.

4.6.8

build 2026.10.06e · 6 Oct 2026

Rotate tool: fixed and cleaner

Fixes

  • Rotating now turns the part around the ring you grab — even after you’ve already tilted or moved it. Before, a tilted part could spin around the wrong axis.
  • The angle readout now resets within one turn instead of climbing past 360° (no more “555°”). A full turn reads 0°.

Better

  • New rotate dial: a clean, see-through protractor with degree numbers and tick marks, and a light wedge showing how far you’ve turned — so the part stays visible while you rotate. Drag near the ring to snap in steps; drag further out for 1° fine control; hold Shift for 45°.

4.6.7

build 2026.10.06d · 6 Oct 2026

BETA badge

New

  • A small BETA badge now sits next to the logo so it’s clear the app is still in active development — expect regular updates.

4.6.6

build 2026.10.06c · 6 Oct 2026

Smoother text plates, Wall fix, faster resizing

Fixes

  • Text backing plate: the words and lines now merge into one smooth plate with no pinch between lines and no lumpy gaps between letters — a clean name-plate shape.
  • Resizing is smooth again: text, sketches and other heavy shapes build at lower detail while you drag a size handle, then snap back to full detail the moment you let go (no more lag).
  • Connect points — Wall: the on-screen outline now matches exactly what gets built, and a Wall closes into a full loop by default (clicking the corners of a box gives all four sides). Untick “Loop back” for an open wall.

New

  • Every design now gets a fun three-word name (like “Zippy Tiny Rocket”) if you haven’t named it, and that name is used automatically when you save or export — no more “Untitled” files.

4.6.5

build 2026.10.06b · 6 Oct 2026

Connect points gets richer, plus a Feedback button

New

  • Feedback button (top bar): send feedback, report a bug, or request a feature in one click. You can tick a box to include your current design so problems are easy to see — nothing is sent unless you press Send.
  • If something ever goes wrong, SimpCAD X can offer to send an error report so it gets fixed (your choice, never automatic).
  • Connect points (beta, was “3D points”): now also builds an upright Wall that follows your points (set its height and thickness) — great for ribs, braces and little enclosures.

Connect points: easier to use

  • Points snap to corners, edge middles, and points you already placed. The snap shows in blue.
  • Click the first point (it turns green) to close a loop and build in one go.
  • Segment lengths and the total path length show on screen as you place points.
  • A clearer panel: 1-2-3 steps, Plate / Wall / Rod / Solid with icons, and a live status line.

Help improve SimpCAD X (optional)

  • The usage setting can now also send anonymous counts of which tools you use (names and numbers only — no files, text, designs or location). Off until you turn it on, and off by default.

4.6.4

build 2026.10.06a · 6 Oct 2026

Faster Cut to fit, everyday items, dark mode

Fixes

  • Cut to fit: big fix. Pieces of detailed models (imported STLs) could come out with 30× more triangles than the model, which made everything lag and parts impossible to drag. Cuts are now exact and clean: about as many triangles as the original, watertight, and several times faster.
  • Cost & weight now uses your nozzle size and layer height (change both right in the panel) and counts top and bottom layers like a slicer does, so weight and print time are much closer to what your slicer says.
  • The window icon now updates to the new X logo (Edge kept the old one).
  • The blue selection outline no longer speckles across the surface of detailed or imported parts: it now stays round the outside edge.
  • “Not fully closed” now tells you why: click it to see the gaps in red and the edges where parts only touch in orange, which input part is broken, and how to fix it (with Repair for imported meshes).

New

  • Everyday Items (for scale): drink cans (330 ml, 500 ml, slim), UK pint glass, mug, bottles, coins, AA/AAA batteries, bank card, phone, SD cards, toy brick, balls… and a banana. Real sizes, so you can see how big your design is.
  • Every new design gets a fun random name (like "Frosty Spanner") instead of Untitled.
  • The shapes library always opens on Basic Shapes.

Beta (Settings → Beta tools)

  • 3D points: click points on your parts, then make a plate that fills between them (great for gussets and braces), a rod that follows them, or a solid that wraps them.
  • Dark mode: Settings (top) → Dark mode (beta), or All settings → Beta tools → Light, Dark or Match Windows.

4.6.3

build 2026.10.05d · 5 Oct 2026

New logo everywhere

Fixes

  • The taskbar and window now always show the new X logo (Windows could keep showing the old cube from earlier versions).

4.6.2

build 2026.10.05c · 5 Oct 2026

Online extras switched on

Online extras (optional)

  • Share a link is now live: Export → Share a link uploads the design and gives you a link anyone can open (kept for 30 days).
  • Count me as a user is now live: about a minute after you start, SimpCAD X asks once if you'd like to be counted. It sends only a random number and the version, once a day. Change it any time in Settings → Online.
  • Nothing is sent unless you say yes, and SimpCAD X still works fully offline.

4.6.1

build 2026.10.05b · 5 Oct 2026

Fixes from your testing, plus sharing and a website

Fixes

  • Overhang map: the model turns plain grey and overhangs get warning stripes, so they show on red (or any colour) parts. Untick "Grey model" to keep your colours.
  • Physics: with several parts selected, each part is checked on its own and falls on its own in the drop test, landing on the others.
  • Small windows: nothing is cut off any more. Tools that don't fit move into a "More" drop-down; Group and Ungroup stay on the bar.
  • Parts with their own Length, Width and Height settings show them once, and the size boxes change the real part instead of stretching it.
  • Cut to fit: "Middle of geometry" moves the connector clear of the other cuts instead of giving up.

Easier to use

  • Move arrows (left side, or press A): drag the red, green or blue arrow to move a part along one direction only, even when it is inside another part. Type the exact distance in the box.
  • Settings button at the top with quick on/off switches (move arrows, overhang map, rotate arrows, snapping, shadows, X-ray, beta tools).
  • New logo: a bold X in the SimpCAD colours.
  • Rotate arrows are Enhanced by default.
  • Drop a shape onto a face and you can use that face as the workplane in one click; or right-click any face → Use this face as workplane.

Online extras (optional, off until you turn them on)

  • Share a link: Export → Share a link uploads the design and gives a link anyone can open (deleted after 30 days).
  • Count me as a user: sends only a random number and the version once a day, so the maker can see how many people use SimpCAD X.
  • Both only appear once the free online service is set up. Nothing is ever sent without your OK.

Behind the scenes

  • The readable text inside the program is now scrambled in release builds, so the code is much harder to copy.
  • Other apps’ names removed from labels (the rotate style is now just "Classic").

4.6.0

build 2026.10.05 · 5 Oct 2026

Bigger library, pro tools, better Cut to fit

Parts library

  • New Car Parts category: wheels, tyres, rims, axles, chassis, body, seats, spoiler, lights, exhaust, bumper, number plate.
  • New Engine Parts category: piston, con rod, crankshaft, camshaft, engine block, valve cover, valves, spark plug, pulley, flywheel, air filter.
  • More parts in every category: beams, brackets, hooks, honeycomb, grilles, nuts and screws, couplers, rails, ball joints, fans, switches, sensors, bevel gears, worms, sprockets, timing pulleys, 26 new symbols and 9 more boards.
  • Every new part is checked watertight at its smallest and biggest settings.

Cut to fit: many more options

  • Cut type: Planar or Dovetail (pieces slide together on a rail).
  • Move or tilt each cut with exact numbers; the cut you are editing lights up orange.
  • Custom connectors: plug, dowel, snap or thread; prism or frustum; circle, square, hexagon or triangle; size and depth with tolerances; middle of geometry or auto spots.
  • After cutting: leave the pieces in place, or spread them on the bed: place on cut, keep orientation, flip or biggest face. Pegs always point up.

Pro tools, kept simple

  • Unlimited undo and redo.
  • Parameters: name a size (width = 60) and use it or a formula in any box; change it and every part follows.
  • Lock the distance between two parts; it holds when the other part moves or changes size.
  • Overhang map (Inspect > Overhangs): shows what needs support, with a Best orientation button.
  • Export > Curve detail: export curves 2× or 4× smoother than on screen.

Easier to use

  • Big, clear Group and Ungroup buttons that light up when they can be used.
  • New colour picker with presets and a colour mixer; your mixes are kept.
  • Messages no longer cover the screen; the new Console (bottom right) keeps every message.
  • Shape tiles sit on soft cards with a crisp shadow.
  • Settings > What's new: this list.

AI designer (beta)

  • Hidden until you turn on Settings > Beta tools.
  • Shows live progress while it works, and can be cancelled.
  • Clearly marked BETA: it uses Ollama, a separate free program, not SimpCAD X itself.

Download 4.9.90