Tool reference
The main tools in SimpCAD X: what each one does, when to use it, its options, its limits and the problems people run into. The same reference is inside the program (the ? on any tool's panel).
Basics
- Solid & Hole: Any shape can be a hole.
- Export for printing: Export STL, 3MF, OBJ or STEP.
- Camera: Right-drag to orbit, middle-drag to pan (the point under the mouse stays put), wheel to zoom toward the cursor — right down to 0.02 mm.
- Adding shapes: Drag a shape from the right-hand panel onto the workplane, or onto any face of another shape: it stands on that face, tilted to match.
- Move, size & lift: Drag an object to move it.
- Duplicate & repeat: Makes a copy in place.
- Lay flat & arrange: Turns every part (or just the selected ones) onto its best flat face and spaces them out neatly on your print bed.
Combine
- Group: Merges the selected solids into one and cuts out any holes.
Arrange
- Align: Shows black dots around the selection.
- Pattern: Makes linear, grid, circular, spiral or along-a-path copies.
Modify
- Fillet & chamfer: Rounds or bevels edges.
- Hollow: Empties a solid inside, keeping an even wall.
- Split: Cuts a part into two printable pieces along a plane you can slide and tilt, with optional pins, plugs, dowels, dovetails, magnet pockets or real threads so the pieces fit back together.
- Threads: Adds real, printable 60° threads — bolts, threaded holes and jar lids — with presets like M5 × 0.8 or 10 × 2, custom pitch, depth and clearance, and a will-it-print check for your nozzle and layer height.
- Parameters: Name a size once (width = 60, wall = 2) and use it anywhere.
- Push / pull: Click a flat face of any part and drag it out to add material, or in to cut into the part (or type the distance).
Create
- Sketch: A 2D drawing board.
- Text: 3D text in any font on your computer, or any font file you add (TTF, OTF, WOFF, WOFF2).
- Loft: Blends smoothly between two or more sketches stacked at different heights, like a vase going from square to round.
- Sweep: Moves a shape along a path to make a solid: a circle along a curve makes a pipe, a square along a zig-zag makes a bar with neat corners.
Inspect
- Measure: Click a face, a hole or a point and read its size: a hole or a peg gives its diameter, two flat faces the distance or the angle between them, a hole and a peg centre to centre and edge to edge.
- Overhang map: A switch: while it is on, faces that lean out too far to print without support turn orange (close to the limit) and red (needs support), live as you design.