Laser Studio and Scan Studio
Every tool of the two studios with the status its automatic checks give it today. Nothing here claims to control a machine or a scanner: the studios make files for the maker's own app or your machine.
Laser Studio
Draw
- Rectangle — ✅ tested: Draw a rectangle (Shift: square), optional corner radius; kept as curves
- Ellipse — ✅ tested: Draw an ellipse or circle as 8 true curves
- Polygon and star — ✅ tested: Regular polygon or star from its centre
- Line / polyline — ✅ tested: Click points; Enter ends an open line; clicking the first point closes it
- Text — 🟡 experimental: Text as outlines in the program's font, on the engrave layer
Text becomes outlines when placed: it cannot be retyped afterwards · One built-in font in Laser Studio - Pen (Bézier curves) — ✅ tested: Click for corner points, drag for smooth curve points; close on the first point, Enter or double-click to finish, Backspace takes a point back
- Arc (three points) — ✅ tested: Start, end, then a point it passes through: a true circular arc
Points
- Edit points — ✅ tested: Drag points and handles, add a point on a line, delete, box-select points
- Smooth, corner, line, curve — ✅ tested: Change point and segment types
- Break, join, close paths — ✅ tested: Open a closed path at a point, join two ends, close an open path
Import
- SVG import — ✅ tested: Real size, curves kept, groups kept, colours to layers, white shapes knocked out as holes, fill-rule nonzero
SVG text is drawn in the program's font, not the file's · Gradients, masks and clip paths are not followed · Linked (not embedded) pictures cannot be read - DXF import — ✅ tested: Lines, polylines with bulges, arcs, circles, splines, blocks; units
TEXT, HATCH and DIMENSION entities are counted and left out (said in a message) - Drag and drop, several files — ✅ tested: Files dropped land where they are let go
- Illustrator .ai and PDF drawings — 🟡 experimental: The first page's vector paths at their real size; Illustrator layer names kept
Text and pictures in the file are not read (text: Create Outlines in Illustrator first) · Only the first page; encrypted and LZW-packed files are not read · Not yet tried on a real Illustrator / CorelDraw export - Pictures to engrave — ✅ tested: PNG, JPEG, WebP, GIF, BMP, AVIF become a picture to engrave
HEIC/TIFF depend on the browser; a message asks for PNG or JPEG - Trace a picture into outlines — 🟡 experimental: Dark (or light) areas become vector outlines
Outlines are straight segments (no curve fitting) · One cut-off level (no multi-colour trace) - From design — ✅ tested: The outline of selected 3D parts seen from above, at real size
Shapes
- Union — ✅ tested: Join shapes into one
Results are straight segments within 5 µm of the curves; not editable afterwards except by Undo - Subtract (real holes) — ✅ tested: Cut the front shapes out of the back one, giving real holes
Destructive (Undo to go back); curves become straight segments - Intersect — ✅ tested: Keep only the overlap
- Difference (XOR / exclude) — ✅ tested: Keep what only one shape covers
- Divide — ✅ tested: Split overlapping shapes into separate pieces
- Combine / Break apart — ✅ tested: Compound shapes that keep holes and curves; release them again
- Offset — ✅ tested: Grow or shrink by an exact distance (round, sharp, square)
- Round and chamfer corners — ✅ tested: Every corner of the selected, or picked points: a true arc tangent to both sides, or a straight cut; too big a size is made to fit and said
Points next to curves are left as they are (said) - Trim and extend — ✅ tested: Trim: click the piece of a line between crossings to take it away. Extend: open ends carried on to the next line they meet
- Split at crossings — ✅ tested: The selected lines and shapes cut where they cross, every piece its own line (curves kept exact)
- Close gaps, simplify, smooth — ✅ tested: Join ends within a distance and close lines that come back to their start; fewer points within a distance; corners into curves
- Box with finger joints — ✅ tested: Every panel of a box (outside or inside sizes, open top or lid), fingers fitting slots, grouped and named
The fit comes from the layer's Kerf: measure it from a test cut - Outline a line (stroke to outline), text to outlines — ✅ tested: A line of a set width made the closed shape it covers (round, square or flat ends); text stays editable (double-click) until made outlines
Arrange
- Select: click, Shift+click, window and crossing boxes — ✅ tested: Pick shapes; groups whole
- Move, scale, turn (handles and boxes) — ✅ tested: Drag, scale handles (corner in proportion, side one way), X/Y/W/H/Turn boxes, arrow keys with a set step
- Mirror — ✅ tested: Mirror left-right or top-bottom
- Groups (nested), edit inside — ✅ tested: Group/ungroup; double-click in, Esc out; each shape keeps its layer
- Stacking order — ✅ tested: Bring forward/front, send backward/back
- Lock and hide, Objects list — ✅ tested: Locked shapes can't be clicked or moved; hidden ones are left out of the job and files
- Align and space — ✅ tested: Line up sides/centres; equal gaps; set gap; centre on the work area
- Duplicate, copy/paste, array, step and repeat — ✅ tested: Copies (groups kept), across projects; grid and circular arrays; step and repeat
- Pack (nesting) — 🟡 experimental: Fit parts on the sheet by their outlines, turning them
Grid-based (0.5 mm); turns in steps; not as tight as true-shape nesting software
Layers
- Layers: line/fill, power, speed, passes, air — ✅ tested: Each layer burns with its own settings; air assist M8/M9
- Fill engraving (rows and rings) — ✅ tested: Scan rows at an interval and angle, or offset rings; holes left unburnt
- Kerf compensation — 🔧 needs a real machine to confirm: Cut half the kerf outside parts and inside holes (or the reverse); written into the SVG
- Tabs (bridges) — ✅ tested: Leave bridges in outer outlines
- Cut order — ✅ tested: Engrave first, holes before outlines, nearest next, loops start nearest the head
Order is automatic: no manual cut-order editing yet - Cross-hatch fill — ✅ tested: Rows one way, then across them
Pictures
- Picture engraving and dithering — 🔧 needs a real machine to confirm: Floyd–Steinberg, Jarvis, Stucki, Sierra, Atkinson, Bayer, threshold, greyscale; brightness, contrast, gamma, invert
- Material test card — ✅ tested: Grid of powers × speeds; pick a square to set and remember a layer's settings
Job
- Job preview and time estimate — 🔧 needs a real machine to confirm: The actual job drawn in order with travel; slider through it; time from speeds and acceleration (every pass shown, ×N)
- Machine work area and safety checks — ✅ tested: Work area per machine; outside is caught; materials unsafe for lasers block export
- Lead-ins and overcut — 🔧 needs a real machine to confirm: Each closed cut starts on a short lead-in in the scrap (outside a part, inside a hole, shortened to fit a small hole) coming in square from the middle of a side, and runs on past its start
Lead-ins are skipped on outlines with tabs · How a maker's app treats them depends on the app: check the first job - Common-line cutting — ✅ tested: Edges two touching parts share are cut once; holes are still cut first; parts that do not touch are cut whole
No kerf compensation on a layer cutting shared edges (the parts must touch) - Cut order — ✅ tested: Best order (holes first, then nearest: least travel) or As listed (the Objects list's order, each shape's holes first); the SVG lists the cuts in that order
- Camera placement, rotary attachment — ❌ not in it yet
Not planned yet: these need the machine's camera and rotary, which run from the maker's app
Export
- G-code: GRBL, grblHAL, FluidNC, Smoothieware, Marlin, Snapmaker 2.0 — 🔧 needs a real machine to confirm: Laser mode, mm, absolute, power on each dialect's scale, laser off on travel, Y from the front
- SVG for Bambu Suite, xTool Studio, Luban, LightBurn — 🔧 needs a real machine to confirm: Millimetres, one group per layer in its colour, holes as even-odd sub-paths, kerf/tabs as cut, pictures as PNG
Project
- Save with the project, Undo/Redo, Cancel — ✅ tested: Everything (curves, groups, holes, pictures, kerf) saved and read back; bad data dropped
Files
- Templates — ✅ tested: Save the set-up (machine, material, layers, and the shapes if wanted), start from it again (Undo takes it back), save it to a file and open it on another computer
Scan Studio
Scan
- Scanner profiles — ✅ tested: A library of scanners: what their software exports and how to bring it in
File import only: SimpCAD X does not connect to or control any scanner - Live scanner connection — ❌ not in it yet
Not implemented and not claimed: scans come in as files
Import
- Import meshes and point clouds — ✅ tested: PLY (ASCII/binary, colours, normals), OBJ, STL, 3MF, GLB; XYZ/ASC/PTS/CSV; damaged files refused
- Point cloud to surface — ✅ tested: A closed surface from points, stray points left out
Closed objects; open surfaces (a single wall) close up
Inspect
- Health report — ✅ tested: Pieces, holes, open and non-manifold edges, watertight
- Measure (rail) — ✅ tested: Measure from the Scan Studio rail: distances, holes, angles on the scan
The measure geometry checks run on exact parts; on scans they measure the scan's triangles
Clean
- Quick clean — ✅ tested: Loose bits off and every hole filled in one step
- Loose bits (size limit) — ✅ tested: Remove pieces under a share of the largest
- Smooth (noise removal) — ✅ tested: Taubin smoothing that keeps the size; strength and passes
Strength below about 0.2 changes very little - Remove table — ✅ tested: Find the table/turntable, cut above it, close flat
Repair
- Fill holes (all, up to a size, picked) — ✅ tested: Patches that follow the surface (faired)
- Flat base — ✅ tested: Cut a flat bottom, closed, on the bed
- Make solid (remesh) — ✅ tested: Rebuild as one closed solid with even triangles
Rebuilds the surface: very fine detail below the remesh size is smoothed
Reduce
- Reduce (decimate) — ✅ tested: Fewer triangles, measured deviation, stays closed
Align
- Lay flat, centre, turn, real size, units — ✅ tested: Orientation and scale
Line up
- Line up (registration) and fuse — ✅ tested: ICP with a global search; fuse into one closed surface
Two scans at a time
Fit
- Find shapes — ✅ tested: Best-fit plane, sphere, cylinder; add as exact parts
Colour
- Colours and print colours — 🟡 experimental: Vertex colours kept; turned into filament colour parts; 3MF with colours
Vertex colours only: texture images (UV maps from OBJ/GLB) are not kept
Compare
- Deviation and colour map — ✅ tested: Distances from the original, mean/max/rms; per-triangle colour map
Project
- History, original kept, Undo/Redo, Cancel, saved — ✅ tested: Every step measured before/after; restore the original; saved with the project
Export
- Export STL, OBJ, PLY, 3MF — ✅ tested: Files read back with every triangle
- Print (open in your slicer) and back to Design — 🔧 needs a real machine to confirm: Hands the scan to the slicer; Done returns to Design with it
Edit
- Sculpt, crop/trim, selection and masking, subdivision — ❌ not in it yet
Not in Scan Studio. Sculpt and Lasso cut exist in Design (More… hands the scan over); subdivision and masking are not implemented